1. PRODUCT PROFILE Hotline: 0904213636
PRODUCT PROFILE
Hotline:

2. CONTENT 1 2 3 4 4 4 5 1 1 1 1 1 1 1 WELDED WIRE MESH - IPC-WIREMESH TM
PROFILED STEEL DECKING - IPC-DECK TM 3 1
OTHER PRODUCTS 4 1 4 1 4 1 5 1 2

3. Deformed Bar Welded Wire Mesh Round Bar Welded Wire Mesh
IPC-WIREMESH TM
IPC Welded Wire Mesh introduction
IPC Welded Wire Mesh is a combination of horizontally and transversely placed cold-drawn wires at right angles to each other.
The joints of the wires are then welded automatically by the principle of combining melting and pressurizing, to uniformly create high strength – high quality wire mesh.
Deformed Bar Welded Wire Mesh
Round Bar Welded Wire Mesh

4. TECHINICAL SPECIFICATION

5. TECHINICAL SPECIFICATION

6. IPC-WIREMESH DIAGRAM APPLIED STANDARD
Vietnam Standard TCVN 9391:2012, Welded fabric for the reinforcement of concrete
Vietnam Standard TCVN 6288:1997, Cold-drawn steel bar for the reinforcement of concrete
Vietnam Standard TCVN :2008 (ISO :1992) Steel for the reinforcement of concrete – Welded fabric
British Standard BS 4482:1985, Specification for cold reduced steel wire for the reinforcement of concrete
British Standard BS 4483:1998, Steel fabric for the reinforcement of concrete
Singapore Standard SS1:1999, Cold reduced steel wire for the reinforcement of concrete
Singapore Standard SS32:1999, Steel fabric for the reinforcement of concrete
Australian Standard TA/TV/4671, Cold reduced steel wire for the reinforcement of concrete
APPLIED STANDARD
IPC-WIREMESH DIAGRAM
STT
Described parameter
Symbol 1
Length of mesh L 2
Width of mesh B 3
Size of mesh
L x B 4
Main wire diameter Dd 5
Cross wire diameter Dn 6
Main wire pitch Pd 7
Cross wire pitch Pn 8
Size of one rectangle section
Pd x Pn 9
Vertical overhang section
M1, M2 10
Horizontal overhang section
S1, S2

7. Full yield strength layered lap Half yield strength layered lap
LAPPING
Laps are used to transfer load across continuous steel reinforcements. In order to do so, standardized length of laps is required
Full yield strength layered lap
Half yield strength layered lap
Flying end lap

8. CONVERTING WIRE ROD TO WELDED WIRE MESH FORMULA

9. IPC-WIREMESH APPLICATION
- Surface platforms, building floors, building roofs
- Concrete walls
- Sewer systems
- Foundations, sidewalks, roads
- Pools, water tanks
- Barriers, fences
- Many other applicable structures

10. IPC-DECKTM INTRODUCTION
IPC Steel deck floors consist of profiled steel sheets and concrete filling, are used to substitute reinforced concrete and/or scraffold.
Structural design of steel deck floors consists of wave-like zinc-galvanized steel sheets, onto which are triangle or round section steel joists, welded altogether

11. IPC-DECK FOR INDUSTRIAL FACILITIES
IPC-DECK TM 2WB
Thickness (mm)
Weight (kg/m2)
Material standard
Coating 1
0.8
7.47
1.JIS G3302:SGC
2.ASTM A653:SS
1.JIS G3302:Z80-Z275
2.ASTM A653:Z90-Z275 2
1.0
9.34 3
1.2
11.20 4
1.5
14.00

12. IPC-DECK FOR INDUSTRIAL FACILITIES
IPC-DECK TM 2WB
Thickness (mm)
Weight (kg/m2)
Material standard
Coating 1
0.8
8.23
1.JIS G3302:SGC
2.ASTM A653:SS
1.JIS G3302:Z80-Z275
2.ASTM A653:Z90-Z275 2
1.0
10.29 3
1.2
12.35 4
1.5
15.43

13. IPC-DECK FOR HIGH-RISE BUILDING FLOORS
IPC-DECK TM 2WB
Thickness (mm)
Weight (kg/m2)
Material standard
Coating 1
0.8
10.47
1.JIS G3302:SGC
2.ASTM A653:SS
1.JIS G3302:Z80-Z275
2.ASTM A653:Z90-Z275 2
1.0
13.08 3
1.2
15.07 4
1.5
19.63

14. IPC-DECK FOR THERMAL POWERPLANTS, REFINERIES…
IPC-DECK TM 2WB
Thickness
(mm)
Weight (kg/m2)
Material standard
Coating 1
0.8
8.86
1.JIS G3302:SGC
2.ASTM A653:SS
1.JIS G3302:Z80-Z275
2.ASTM A653:Z90-Z275 2
1.0
11.07 3
1.2
13.29 4
1.5
16.60

15. IPC-DECK FOR THERMAL POWERPLANTS, REFINERIES…
IPC-DECK TM 3WB
Thickness (mm)
Weight (kg/m2)
Material standard
Coating 1
0.8
10.47
1.JIS G3302:SGC
2.ASTM A653:SS
1.JIS G3302:Z80-Z275
2.ASTM A653:Z90-Z275 2
1.0
13.08 3
1.2
15.07 4
1.5
19.63

16. IPC-DECK ACCESSORIES

17. IPC-DECK CALCULATION FORMULAS

18. PANEL – JOIST DECK JOINT
PANEL – PANEL
DECK JOINT
Screwing method
PANEL – JOIST DECK JOINT
Welding method

19. PROPPING
Depending on the span of the deck panel, temporary propping may be needed when constructing IPC-DECK. Following is some advice of propping methods.

20. NOTES WHILE CONTRUCTING IPC-DECK
Delivering IPC-DECK Panels, by specific transportations
Stocking IPC-DECK panels, to prevent moist and create ventilation
Lifting IPC DECK panels

21. NOTES WHILE FILLING CONCRETE FOR COMPOSITE MATERIAL WITH IPC-DECK
Start raking as soon as the concrete is poured out
Do not directly step on the panels as they could be deformed Place hard boards above for walking surface

22. OTHER PRODUCTS
WIRE ROD
GALVANIZED STEEL WIRE

23. PLASTIC COATED STEEL WIRE
OTHER PRODUCTS
COLD – DRAWN STEEL WIRE
1.0 MM WIRE
PLASTIC COATED STEEL WIRE