1. Minimizer Confidential
1/20/2016
Minimizer Confidential

2. Minimizer Confidential
1/20/2016
Minimizer Confidential

3. Minimizer Confidential
1/20/2016
Minimizer Confidential

4. Minimizer Confidential
Fast Flap
Minimizer Confidential

5. 1/20/2016

6. Minimizer Confidential
Product Overview
Mounts to rear of your truck or trailer frame.
Designed for use in Vocational Trucks.
Details / Specifications
(4) 9.5” (L) x 2.8” (H)
Features
Allows – Mud Flaps to release free from bracket without causing damage to flaps, hanger bracket or fender
Retail Packaged - for in store POP direct sales
Full assembly – no additional brackets required - Mud Flaps Sold Separately
Durable – All stainless steel, heat tempered to spring steel
Secure – Mud flap fastened in with spring steel clamping force
Save Money – No damage, no shop labor, no down time or DOT fines
Industry Applications – For both on-road and off-road trucking including; Dump Trucks, Cement Mixers, Asphalt, Block, Logging, Roll-Off and Garbage Trucks. Also great for freight haulers that often experience mud flap damage.
Proven Product! Thousands in use on Owner Operators, Fleets, Municipalities and D.O.T. equipment throughout U.S. & Canada
Standard – 7” on center bolt pattern
1/20/2016
Minimizer Confidential

7. Minimizer Confidential
Part No.:
Description Search: FSTFLP-K
Styles: Standard Style
Color Options: Heat Tempered Spring Steel – Stainless Steel
Overall Dimensions: 9.5” Long x 2.8” High x 1 7/8” Deep w/bolt (7/8” Deep flap only)
Overview: Minimizer owned product. Outsourced manufactured, full inventory. Ready to sell.
Warranty: Lifetime
Weight: 4.2 lbs.
1/20/2016
Minimizer Confidential

8. Minimizer Confidential
About Minimizer Fast Flap®
Minimizer Fast Flap, mud flap releasable hanger brackets were designed for truck drivers by a truck driver/excavator with over twenty five years of experience.
Minimizer Fast Flap, mud flap releasable hanger brackets are made of Stainless Steel. Heat tempered to spring steel. The spring steel gripping force of the brackets holds mud flaps securely in place.
1/20/2016
Minimizer Confidential

9. Minimizer Confidential
About Minimizer Fast Flap®
Minimizer Fast Flap bolts directly onto standard 7” on center bolt pattern on heavy duty commercial trucks.
Minimizer Fast Flap brackets are designed to be used with a set of ¼” or 3/8” thick standard commercial rubber mud flaps.
Based on multiple tests that used ¼” thick rubber mud flaps, the mud flap will start to release from brackets when downward force exceeds an average of 516 lbs.
1/20/2016
Minimizer Confidential

10. Minimizer Confidential
About Minimizer Fast Flap®
Based on multiple tests that used3/8” thick rubber mud flaps, the mud flap will start to release from brackets when downward force exceeds an average of 457 lbs.
Mud Flaps will release damage free from brackets when backing up into any type of obstructions which cause the flaps to be pinched against the rear tire.
The mud flap can be reinstalled on site by the driver in under One Minute! Preventing expensive fines for driving without a mud flap and saving you money on costly down time, damage and shop labor expense.
1/20/2016
Minimizer Confidential

11. Minimizer Confidential
1/20/2016
Minimizer Confidential

12. Minimizer Confidential
1/20/2016
Minimizer Confidential

13. Minimizer Confidential
Front of
Placard
Back of
Placard
1/20/2016
Minimizer Confidential

14. Minimizer Confidential
1/20/2016
Minimizer Confidential

15. Minimizer Confidential
Installation Instructions:
1.) Remove existing mud flaps.
1/20/2016
Minimizer Confidential

16. Minimizer Confidential
Installation Instructions:
2.) Install brackets into existing mounting holes using provided hardware.
Install & tighten lock nuts
10-Ft./lbs. of torque is all that is needed.
Over tightening may result in damage.
CAUTION:
Always wear eye protection when installing mud flaps into brackets. Keep fingers and hands out of and away from gripping area as injury may occur.
1/20/2016
Minimizer Confidential

17. Minimizer Confidential
Installation Instructions:
3.) Use a quality made flat head screwdriver (minimum length of 10”) to pry open one bracket at a time to install mud flap. Insert screwdriver tip into center hole resting tip on flat portion above. Pry open bracket and slide flap in. Repeat this process between the two brackets until flap is fully engaged against the top/inside portion of the brackets.
1/20/2016
Minimizer Confidential

18. Minimizer Confidential
Installation Instructions:
4.) Wipe surface of Minimizer Fast Flap hanger to remove residue before applying conspicuity tape. Place two (2) pieces of tape on each hanger; alternating between RED and White. **Note white should always be placed to the outside edge of the vehicle side.**
1/20/2016
Minimizer Confidential

19. Minimizer Confidential
1/20/2016
Minimizer Confidential

20. Minimizer Confidential
Mounting Bracket
Minimizer Confidential

21. Minimizer Confidential
1/20/2016
Minimizer Confidential

22. Minimizer Confidential
1/20/2016
Minimizer Confidential

23. Minimizer Confidential
Product Overview
Mounts to rear of your truck or trailer frame.
Designed for use with all Trucks/Tractors /Trailers.
Minimizer Part#
103022
Warranty
5 Year Warranty - When used with Minimizer Fast Flap – Part#
Details / Specifications
Size: (2) 30.5”(L) x 4”(H)
Weight: 23.4 lbs. (Complete kit – Including Fast Flaps)
Features
Allows – Fast Flaps or mud flaps to be bolted to on standard tractors / straight trucks or trailers that would otherwise not have a mounting point.
Full assembly – no additional brackets required.
Durable – Powder Coated Black Carbon Steel
Industry Applications – For both on-road and off-road trucking including; Dump Trucks, Cement Mixers, Asphalt, Block, Logging, Roll-off and Garbage Trucks. Also great for freight haulers that often experience mud flap damage.
Standard – Size bolting pattern; if no holes are available, use bracket as guide to drill holes.
Tested – Will withstand 500lbs. of downward pull force, if using in conjunction with your Minimizer Fast Flaps. Flaps will release far before bracket arm will bend.
1/20/2016
Minimizer Confidential

24. Minimizer Confidential
Product Overview
Mounts to rear of your truck or trailer frame.
Designed for use in Vocational Trucks.
Details / Specifications
(4) 9.5” (L) x 2.8” (H)
Features
Allows – Mud Flaps to release free from bracket without causing damage to flaps, hanger bracket or fender
Retail Packaged - for in store POP direct sales
Full assembly – no additional brackets required - Mud Flaps Sold Separately
Durable – All stainless steel, heat tempered to spring steel
Secure – Mud flap fastened in with spring steel clamping force
Save Money – No damage, no shop labor, no down time or DOT fines
Industry Applications – For both on-road and off-road trucking including; Dump Trucks, Cement Mixers, Asphalt, Block, Logging, Roll-Off and Garbage Trucks. Also great for freight haulers that often experience mud flap damage.
Proven Product! Thousands in use on Owner Operators, Fleets, Municipalities and D.O.T. equipment throughout U.S. & Canada
Standard – 7” on center bolt pattern
1/20/2016
Minimizer Confidential

25. Minimizer Confidential
Designed with the intent of expanding the coverage of the Fast Flap® from just dump trucks to standard tractors. To be sold only with the Fast Flap®.
If used without the Minimizer Fast Flap then there is NO warranty available on this product.
Special hole pattern on mounting bracket that allows mounting to almost all existing bolt patterns on the truck or trailer frame.
If you have a special application that isn’t covered just use the bracket as a template to drill a new hole(s) into the frame rail.
Kit Part No.:
Minimizer Confidential

26. Minimizer Confidential

27. Minimizer Confidential

28. Minimizer Confidential

29. Minimizer Confidential

30. Minimizer Confidential

31. Minimizer Confidential