Presentation is loading. Please wait.

Presentation is loading. Please wait.

Godley Ag Mechanics Shop Safety

Similar presentations


Presentation on theme: "Godley Ag Mechanics Shop Safety"— Presentation transcript:

1 Godley Ag Mechanics Shop Safety

2 Have Safety Issues?

3 I am not sure if electricity and water mix?????

4 Why do we need to be concerned with SAFETY?

5 Have Safety Issues?

6 My Favorite

7 Objectives Develop safety awareness Practice protective eye care
Dress properly for laboratory activities Practice good house keeping in labratory

8 Objectives Understand color codes and apply color dynamics to safety
Practice proper laboratory behavior Understand fire prevention and use fire extinguishers Understand first aid requirements

9 4,821 workers were killed on the job in 2014 [www. bls
4,821 workers were killed on the job in 2014 [ (3.4 per 100,000 full-time equivalent workers) — on average, more than 92 a week or more than 13 deaths every day.

10 Falls — 359 out of 899 total deaths in construction in CY 2014 (39.9%)
Electrocutions - 74 (8.2%) Struck by Object - 73 (8.1%) Caught-in/between* - 39 (4.3%)

11 nearly 3.0 million nonfatal workplace injuries and illnesses reported by private industry in 2014 occurred at a rate of 3.2 cases per 100 equivalent full-time workers The rate reported for 2014 continues a pattern of declines that, with the exception of 2012, occurred annually for the last 12 years.

12 Safety Awareness A total of 4.3 million nonfatal injuries and illnesses were reported in private industry workplaces during 2004, down from 4.4 million in 2003. These cases occurred at a rate of 4.8 cases per 100 equivalent full-time workers, according to the Survey of Occupational Injuries and Illnesses by the Bureau of Labor Statistics (BLS), U.S. Department of Labor.

13 Safety Awareness During , 14 133 students in grades 7 through 12 were injured at school, of which 1008 (7.1%) were injured during a shop class. The majority (88.4%) of shop injuries involved equipment use. Equipment was misused in 37.9% and malfunctioned in 3.5% of the incidents. The leading injuries reported for shop equipment were lacerations (70.9%), burns (6.0%), and abrasions (4.6%), whereas the leading for nonequipment injuries were lacerations (45.4%), fractures (9.2%), and pain/tenderness (6.7%) (pediatrics publications)

14 Our shop Last year students have had multiple minor burns due to hot metal and cuts or abrasions AMCHS Laceration- Student cut off the tip of his finger 2- Lacerations from broken glass 1- Laceration from materials Student burned arms due to not wearing long sleeve shirt while welding 1 Laceration from sharp piece of metal

15 Eye Care Safety glasses- must be worn at all times and be designated Z87

16 Eye Injury

17 Eye Care Safety shields- must be worn when working with any type of grinder. Tinted shields to be worn when working with oxy-fuel equipment

18

19 Proper Dress IF YOU HAVE LONG HAIR OR A LONG BEARD, TIE IT UP. If your hair is caught in spinning machinery, it will be pulled out if you're lucky. If you're unlucky, you will be pulled into the machine. NO LOOSE CLOTHING. Ties, scarves, loose sleeves, etc. are prohibited NO GLOVES REMOVE JEWELERY WEAR APPROPRIATE SHOES No open toed sandals. Wear shoes that give a sure footing. If you are working with heavy objects, steel toed are recommended.

20 Hand Injuries

21 House Keeping (Shop Layout)
See attached All tools will return when they are finished being used! Clean-up will happen the last five minutes of class. It is YOUR responsibility to make sure everything YOU used is put back and YOUR area is clean. THIS IS NOT YOUR MAMA’S HOUSE!

22 House Keeping Any tool(s) which has (have) been broken or not in good repair will be need to be reported to the teacher. Do not put the tool back if you know it can not be used again. Unsafe tools make an unsafe shop.

23 Color Codes Color codes identify the type of hazard Red= Danger
Yellow= Caution Orange= Warning Blue= Safety Green= Location of First Aid Equipment Fluorescent Orange/Orange-Red= Biosafety

24 Shop Behavior Students are expected to wear safety glasses ANY time they enter the shop. No exceptions! They are to be returned to storage after being used and cleaned if needed. Horseplay is NEVER permitted in the shop. You are expected to behave like a professional. Anyone not doing so will face severe punishment. AND I will remind you that “horseplay” is left to my judgment, so THINK before you do anything! All safety precautions and proper operating procedures will be followed for each and every tool in the shop.        

25

26 Shop Behavior Power tools are not to be played with. Don’t turn them on unless you are using them. The air lines and tools are not toys. Never spray yourself or another person with compressed air.      When another student is using a piece of machinery, all others are to stay out of the work area while the machine is running.        If you spill something, you are expected to clean it up immediately.        

27 MSDS A material safety data sheet (MSDS) is a form containing data regarding the properties of a particular substance

28 Shop Behavior No one is to be near the welding area without wearing a welding helmet.    You are NEVER allowed to use a tool which you have not been tested on and passed that test. All tools will be wiped down and properly stored when you are no longer using them.

29 Shop Behavior The metal storage rack is off limits. No one is to take or touch any of the materials on the rack without teacher permission. Any problems with a tool should be reported to the instructor immediately.

30 Shop Behavior Lastly, this shop is equipped just like any modern machine shop or auto shop. You are expected to treat everything and everyone in the shop with respect. Working in the shop with the tools is a privilege that you can lose for ANY reason, so use your good sense! (Parks)

31 Fire Prevention Do not weld near any combustible chemicals or open flame. Do not place hot metal near anything that could possibly start a fire

32 Most fires in our shop are started like this

33 Using a Fire Extinguisher (PASS)
Pull the pin. This will allow you to discharge the extinguisher. Aim at the base of the fire. If you aim at the flames (which is frequently the temptation), the extinguishing agent will fly right through and do no good. You want to hit the fuel.

34 Using a Fire Extinguisher
Squeeze the top handle or lever. This depresses a button that releases the pressurized extinguishing agent in the extinguisher. Sweep from side to side until the fire is completely out. Start using the extinguisher from a safe distance away, then move forward. Once the fire is out, keep an eye on the area in case it re-ignites.

35 First Aid Requirements
If an accident happens the first thing to do is let the teacher know. Do not for any reason hide an accident or injury from the teacher.

36 First Aid Requirements
For minor cuts and burns you can use the first aid kit located above the fire extinguisher next to the teacher’s office or you can go to the nurse’s office. For serious injuries professional assistance will be attained by the teacher.

37 Nail in toe Nail gun on a job site

38 gloves


Download ppt "Godley Ag Mechanics Shop Safety"

Similar presentations


Ads by Google