1. Bio-Fuel Applications
N-Butanol

2. Maruti Shekari Asawani, LTD. (“M. S
Maruti Shekari Asawani, LTD. (“M.S.A”) is proud to bring you our new innovating n-Butanol production technology.
We produce n-Butanol from any Bio-Ethanol.
100% green, environment friendly fuel.
We use catalyst – based – conversion
We use non-edible feedstock
INTRODUCTION

3. Using our catalyst based technology allows us to achieve production yield of 78-80% !!
Our best competitors using fermentation based technologies achieve max %.
Our remaining 20-22% “waste” are just water…
Our n-Butanol has > 97% purity.
PRODUCTION

4. Our production facility can be added to any existing Bio-Ethanol plant.
Our technology uses cheap catalyst with low price impact.
Eligible for RINs cash credits
The rule is simple : Cost efficient production lowers the price for you.
PRODUCTION

5. CHARACTERISTICS Higher energy content .
6 times less evaporative than ethanol.
Lower Reid vapor pressure.
Increased energy security.
Fewer emissions.
CHARACTERISTICS

6. FUEL APPLICATIONS Can be blend with Gasoline up to 16%
Can be blend into Biodiesel up to 10% to lower its viscosity Without any bad effect on the overall.
No need for engine modifications
Improves Biodiesel and Ethanol blends.
Lowers exhaust emission and pollution.
Vast variety of applications : Marine, Transportation, Jet , Industrial…
FUEL APPLICATIONS

7. n-Butanol is of particular interest as a renewable biofuel as it is:
less hydrophilic
possesses higher energy content
higher cetane number
higher viscosity
lower vapor pressure
higher flash point
and higher miscibility than ethanol
All of the above making it more preferable than ethanol for blending with diesel fuel
BIO - BLENDING

8. Our n-Butanol compiles with the blending regulations under ASTM D7862-13.
The ASTM D specification is set to be used by biofuel producers, petroleum refiners, gasoline blenders, government agencies inspection laboratories, and manufacturers of motor vehicles, marine engines and outdoor power equipment.
BIO - BLENDING

9. One of the researches been done in 2015 comparing the properties of n-butanol and Isobutanol injected into motor engine showed (almost) zero difference between the two isomers.
Applying small-shared volumes of n-butanol to diesel fuel improves the BTE and BSFC requiring no engine modification compared with that of ethanol-or methanol-diesel blends.
BIO - BLENDING

10. BIO - BLENDING n-Butanol blends 10-100% reduce CO and HC gases.
Lower blends 5-10% reduce Nox pollution.
There is a no effect on fuel consumption and CO2 levels.
the substitution of E10 by n-butanol (BUT16) presents a series of benefits compared to ethanol blends, which makes n-butanol a promising fuel for SIEs.
BIO - BLENDING

11. We provide complete technology solution for value addition of ethanol to butanol on mutually agreed terms and condition. These could be:
Technology Transfer JV
Royalty on the manufacturing
Any other model that could benefit either way
Please feel free to contact us so we can set a meeting or a conference call and answer all your questions, thoughts, ideas and more.
BUSINESS VENTURE

12. CONTACT US