1. Metric System Notes Introduction
The official name of the metric system is Systeme International d'Unites (International System of Units), usually known simply as SI.
The term metric comes from the base unit of length in the system, the meter, for which the international spelling is meter.
A group of French scientists created the metric system in the 1790's. Since then, the system has been revised several times.

2. Metric System Notes Why do we use the metric system?
1. Almost all other countries are using the metric system
2. Other countries’ companies are refusing to buy products from the U.S. if not labeled in metric units
3. Scientists need a universal way to communicate data
(SI Units)

3. Metric System Notes Using the metric system
The metric system is simple to use for two reasons:
First, it follows the decimal number system-- metric units increase or decrease in size by 10's.
2. The metric system has only 7 base units that make up all its measurements. (The inch-pound system has more than 20 base units for just its common measurements.)
1. For example, a meter has 10 parts called decimeters. A decimeter has 10 parts called centimeters. Units in the inch-pound system have no single number relationship between them. For example, feet and yards are related by 3's, but feet and inches are related by 12's.

4. Scientists all over the world use SI units to measure:
Metric System Notes
Introduction
Scientists all over the world use SI units to measure:
Length
Volume
Mass
Temperature
Time

5. Length _____________________________________
Can you name some of the units that we use in America to measure the following things?
Inches, Feet, Mile, Yard, Acre, etc….
Length _____________________________________
Mass ______________________________________
Liquid Volume ______________________________
Temperature ________________________________
Time ______________________________________
Pounds (lbs), Ounces (oz.), Tons etc….
Ounces, Quarts, Pints, Gallons, etc….
Degrees Fahrenheit
Seconds, Minutes, Hours, Days, Years, etc….

6. Metric System Notes The Metric System has 3 simple Base Units
1. Meter (m) - measures length
2. Gram (g) - measures the mass of an object.
3. Liter (L) measures volume which is used when measuring liquids

7. Length _____________________________________
In the metric system, scientists use these measurements to measure the following things?
Meter, Kilometer, Centimeter, Millimeter
Length _____________________________________
Mass ______________________________________
Liquid Volume ______________________________
Temperature ________________________________
Time ______________________________________
Grams, Kilograms, Milligrams
Liter, Milliliter
Degrees Kelvin or Celsius
Seconds, Minutes, Hours, Days, Years

8. Metric System Notes Length Length is the distance between two points.
The metric tool used to measure length is the meter stick or metric ruler.
The most common units used to measure length are kilometer (km), meter (m), centimeter (cm) and millimeter (mm).

9. Metric System Notes Measuring Length
The longer, numbered lines on the metric ruler are called…
centimeters

10. Metric System Notes Measuring Length
The shorter lines (not numbered) on the metric ruler are called…
millimeters

11. Remember that the metric system is based
Metric System Notes
Measuring Length
One centimeter on a metric ruler is divided into how many millimeters?
Remember that the metric system is based
on the number 10.
10 mm

12. Metric System Notes Measuring Length
Measure the turtle below from the rear of its shell to the tip of its nose. Record its length in both centimeters and millimeters.
10.5 cm
105 mm

13. Metric System Notes Mass Mass is the amount of matter in an object.
The metric tool used to measure mass is the triple-beam balance.
The most common units used to measure mass are kilogram (kg), gram (g), and milligram (mg).

14. Metric System Notes Weight Vs. Mass
How would your weight differ if you were to travel to the moon?
If you were to travel to the moon your weight would be less.
Your weight would be lesser because the force of gravity is less.
Weight is a factor of the force of gravity

15. Metric System Notes Weight Vs. Mass
Why would your mass stay constant if you were to travel to the moon?
Your mass would stay the same if you were to travel to the moon because mass is the amount of matter that an object contains
Since you are still made up of the same amount of “stuff”, your mass would not change

16. Metric System Notes Weight Vs. Mass
Why do scientists prefer to use the mass of an object instead of its weight?
Scientists prefer to use an objects mass instead of its weight because mass does not change when the force of gravity does.

17. Metric System Notes Measuring Mass
A triple-beam balance works by comparing the mass of the object you are measuring to a known mass.
When you use a triple-beam balance, you:
Check to make sure the scale is balanced and all riders are aligned on the left side.
Place the object on the pan
Shift the riders on the beams until the pointer is level with the 0.
>>Start with the large rider (increments of 100)
>>Next, the medium sized rider (increments of 10)
>>Lastly, the small rider (increments of 1) – sometimes it’s best to use a pencil to move this rider
4. Add up all the values to get the objects’ mass.
5. Take the object off the pan and zero out all riders.

18. Metric System Notes Using a Triple-beam Balance 153.7 g
What is the mass of the turtle below?
153.7 g

19. Label the different parts of the Triple-Beam Balance.
Beams
Pan
Riders
Pointer

20. Metric System Notes Volume
Volume is the amount of space an object takes up.
The metric tool most commonly used to measure volume in science class is the graduated cylinder.
The most common units used to measure volume are liter (L) and milliliter (mL).

21. Metric System Notes How to use a Graduated Cylinder
This 100 mL graduated cylinder has markings that are in increments of…
1 milliliter (mL)

22. This graduated cylinder has markings that are in increments of …
Metric System Notes
How to use a Graduated Cylinder
This graduated cylinder has markings that are in increments of …
0.5 mL

23. Metric System Notes Reading a Meniscus
A meniscus is the curve in the top surface of water in the graduated cylinder
The proper way to read a meniscus is to read the milliliter marking at the bottom of the curve.

24. Volume = Length x Width x Height
Metric System Notes
Volume of a Regular Solid
A regular solid is any 3 dimensional object that has sides that can be measured.
To measure a regular solid, a formula for volume can be applied
To measure a rectangular object such as a shoebox, multiply the object’s length, width, and height
Volume = Length x Width x Height

25. Metric System Notes Units for Regular Solid Volume
The unit used for regular solid volume = m3 or cm3
Why is the unit cm³ used when calculating the volume of a rectangular object?
When multiplying the object’s length, width and height, the cm units are also multiplied
cm x cm x cm = cm³
1cm3 = 1 mL