1. 195E Serial Interface
SECTION 9 - Serial Interface

2. Serial Over Broadband Serial Interface on 195E products
Serial Data Transferred Over Ethernet System
Configure Ethernet links first
Troubleshooting and diagnostic of WLAN network
Serial Links are Transparent
Two Modes of Operation
Point to Point
Multicast

3. 195E Serial Interface Layout
Second Ethernet Port
RS-232 Data Port
RS-232 Configuration
RJ-45 10/100BaseT
Ethernet Port
Reset Switch
Status LED
Aux Power LED
Receive LED
12 VDC Input (Auxiliary Connector )
Transmit LED
Power over Ethernet LED

4. 210 Serial Interface Layout
Power LED
RJ-45 10/100/1GB
Ethernet Port
USB Configuration
Receive LED
RS-232 Data Port
Status LED
RSSI LED Meter
Transmit LED
12 VDC Input
Reset Switch

5. Serial Port Configuration
Single Page Configuration on Setup
Data Rate, Parity, Start/Stop Bits
Transmission Characters
Data Format
Multipoint System
All remote sites will receive the data
Set to multicast address
Default Route must be set to the IP address of Root Bridge
Separate Networks with Port Number

6. Serial and Ethernet Networks
Hybrid of Both Serial and Ethernet Interface
Both Serial and Ethernet Network Can Work Simultaneously
Legacy systems
Adding in new locations to existing site
Providing video link on serial network
Serial Network has Little Impact on Bandwidth