1. WE MAKE IT HAPPEN

2. INTRODUCTION
Products are manufactured in brand new facilities covering 26,000 m2 production area, formerly recognized as Alcatel-Turkey.
%75 of production is exported to Europe, Russia, Asia Pacific
Middle East, North & Sub-Saharan Africa, USA, CIS and Central America.
Branch offices in USA,Greece, Russia, Iran, Indonesia and UAE.
42 Distributors around the globe, coverage of 60 countries.

3. GLOBAL REFERENCES

4. Smart Patch Panel

5. WHY DO WE NEED THE SMART PATCH PANELS FOR ?

6. Let’s say that we need to change the direction or the position of a single cable. How will you find your cable????

7. How would you feel if your patch panel had led indicators to discriminate one port to the other and also assign each port to an end-user or other equipment?
All ports are remotely configured / controlled by the accompanied software.

8. Highlights:
Create a rack-based / room-based / building-based connections map.
Assign all available slots into users or equipment.
Monitor the status of the connected patch cords.
Local & Remote alerts with pop-ups & s when the patch cord has accidentally / on purpose been disconnected.
Blink the led of the single desired port for easier tracking of the desired port needed to be modified.
Print the map with the assigned ports with real time information whether the port is already occupied or not.
Log all connections (plug/unplug) with precise date & time information.

9. Slot level information:
Sample message:
Command: “Show me Yvonne’s patch cord” request.

10. All Product Range.

11. All Product Range.

12. All Product Range.

13. All Product Range.

14. Dynamic Comparison. AMP VS CANOVATE COMPANY AMP CANOVATE SYSTEM
AMPTRACS
SMART P.P.
Hardware
1.Need Master, Expanders and Scanners to achieve a huge system. So it is increase the needed of place and costly. 2.without embedded design. If any port is corrupted, it must change the entire set of equipment that increases high maintenance cost.
1. Flexible and easy expandable.
2. Any corrupted port needs just an individual port reset function.
Software
1.Managed Network Resources via management software. 2.Remote control function, ex: PDA, TCP/IP. 3.Graphical interface. 4.Various functions, but not friendly in use. 5.Need a professional person to use this system.
1.Simple interface is easy to use. 2.Everyone can easily to use this system. 3.Broadcast function. 4.Table interface. 5.Guide functions of Move, Add, Change, Delete channel.
Technology
1.Use 9-pin patch cord to achieve the channel-link detection. So, it must use special patch cord. It is a problem of the costs and storage. 2.Use flex-cable to communication and support power. 3.To expand the system it needs add expander and scanner. 4.Parallel transmission needs more cables.
1.Use regular 8-pin patch cord to achieve the port detection / no stock issue. 2.Alternatively using twist pair cable. 3.To expand system, only add MCU module. 4.Serial transmission that saves number of cables.

15. THANK YOU FOR YOUR ATTENTION
QUESTIONS? 15