1. The ACCUFAST KT The ACCUFAST KT Mail Tabber
The ACCUFAST KT is a feature rich basic tabbing machine. It uses plain circular or rectangular tabs either opaque or clear. It tabs pieces up to ¼” in thickness and it rolls the waste up on a take up spool. It applies either 1 inch or 1.5 inch tabs at speeds of 15,000 per hour. It is a stretch to refer to the ACCUFAST KT as a basic tabber – there’s a lot of the professional in the KT.
The ACCUFAST KT Mail Tabber
Phone: / FAX

2. ACCUFAST KT Phone: 401-729-1131/ FAX 401-729-1133
• applies 1 tab per piece
• tabs 15,000 pieces per hour
• tabs pieces 5” to 12” wide, from 20 lb. thin to 1/4” thick, coated and uncoated
• runs a variety of 1 and 1.5 inch tabs: paper
& clear, circles & rectangles, on rolls with or without tractor holes
• built-in waste take-up spool
5,000 one inch and 4, inch tabs per roll.
• weighs 47 pounds
• measures 10”l x 17”h x 21”w
• uses 115 volts 2 amps 60 hz or 230 volts 1 amp 50 hz
• goes in-line with ACCUFAST and other table top Labelers, Feeders and Printers
• its outstanding feature is its ability to run both 1 and 1.5 inch tabs at the flick of a switch.
Phone: / FAX