1. Kevin Boyce Director of Product Management, LED Drivers
PA and PWA LED Drivers
Kevin Boyce
Director of Product Management, LED Drivers

2. PA and PWA Drivers PA PWA Programmable Features Programmable
Auxiliary Output
Programmable
Wireless Programming
Auxiliary Output
Programmable Features
Output Current – programmable down to 30% of rated current
Dimming Level – programmable down to 1% on PWA and 5% on PA
Dimming Curve – programmable to Linear, Linear Soft Start or Logarithmic
Dimming Control Voltage – Dim-to-off, minimum dimming and maximum dim control voltages
Programming Solution
LDPC000A
Configuration Tool
EVERset Programming Software
PA and PWA Drivers

3. Dimming Curve Linear Linear Soft Start Logarithmic - 2
Most Common dimming curve
Works well with dimmers with a logarithmic response
Linear dimming curve with a softer start
Helps to minimize the “jump” in light output that can be seen when a dimmer is adjusted up from the minimum level
Typically associated with DALI
Works well with dimmers with a linear response
The logarithmic base can set from 0 to 7, with larger numbers providing for a steeper curve
Puts more response at the low end where light level changes are more noticeable

4. Dimming Curve – Control Voltage Break Points
Full Bright Control Voltage
Can be set from 7 to 9Vdc
Minimum Dim Control Voltage
Can be set from 1 to 3Vdc
Dim-to-off Control Voltage
Can be set from 0.1 to 1.7Vdc
Must be set at least 0.2V below minimum dim control voltage
Prevents the driver from cycling between dim-to-off and minimum dim voltage when there are small fluctuations in the dimming signal

5. Dimming Profiles
Example – New Luminaire Profile
Output Current
1050mA
Min Dim Current
10.5mA
Dimming Curve
Logarithmic - 1
Max Bright Control Voltage
9Vdc
Min Dim Control Voltage
0.5Vdc
Dim-to-off Control Voltage
0.1Vdc
Example – Replacement Luminaire Profile
Output Current
1050mA
Min Dim Current
10.5mA
Dimming Curve
Linear
Max Bright Control Voltage
8Vdc
Min Dim Control Voltage
1Vdc
Dim-to-off Control Voltage
disabled
Adjustment of the dimming curve break points and dim-to-off allow for a customized dimming profile to be configured for a luminaire.

6. Auxiliary Output Power
1.2W Auxiliary Output
12Vdc 100mA or
24Vdc 50mA
30W PWA
OTi30/ /1A0 DIM-1 L AUX
No Offering
55W PWA
OTi50/ /1A4 DIM-1 L AUX
80W PWA
OTi 85/120‐277/2A3 DIM‐1 L AUX
55W PA
95W PA F-Can
95W PA VF-Can
PWA Series
PA Series
Auxiliary output power is a key selling feature!

7. Universal PWA Drivers

8. 30W PWA Driver 1050mA Programmable LED Driver Driver Operating Range:
Universal ( V) Input Voltage
Class 2, 30W Constant Current Output
RFID Programming
0-10V Dimming to 1%
Dim-to-Off
Class 1 or Class 2 Control Circuit
12V or 24V 1.2W Auxiliary Output Options
~2-3W Driver Standby Power
UL Listed / Class P
C-Can
Programmable Dimming Features
Driver Operating Range:
KSP
KSP
Voltage
KSP
Current (mA)

9. 55W PWA Driver 1500mA Programmable LED Driver Driver Operating Range:
Universal ( V) Input Voltage
Class 2, 55W Constant Current Output
RFID Programming
0-10V Dimming to 1%
Dim-to-Off
Class 1 or Class 2 Control Circuit
12V or 24V 1.2W Auxiliary Output Options
~2-3W Driver Standby Power
UL Listed / Class P
C-Can
Programmable Dimming Features
Driver Operating Range:
KSP
KSP
Voltage
KSP
Current (mA)

10. 80W PWA Driver 2100mA Programmable LED Driver Driver Operating Range:
Universal ( V) Input Voltage
Class 2, 80W Constant Current Output
RFID Programming
0-10V Dimming to 1%
Dim-to-Off
Class 1 or Class 2 Control Circuit
12V or 24V 1.2W Auxiliary Output Options
~2-3W Driver Standby Power
UL Listed / Class P
D-Can
Programmable Dimming Features
Driver Operating Range:
KSP
KSP
Voltage
KSP
Current (mA)

11. Universal PA Drivers

12. 55W PA Driver 1500mA Programmable LED Driver Driver Operating Range:
Universal ( V) Input Voltage
Class 2, 55W Constant Current Output
0-10V Dimming to 5%
Dim-to-Off
Class 1 or Class 2 Control Circuit
12V or 24V 1.2W Auxiliary Output Options
~2-3W Driver Standby Power
UL Listed / Class P
IEE C kV Transient Protection
Short F-Can Housing
Programmable Dimming Features
KSP
Driver Operating Range:
KSP
KSP
Voltage
Current (mA)

13. 95W PA Drivers 2800mA Programmable LED Driver Driver Operating Range:
Universal ( V) Input Voltage
Class 2, 95W Constant Current Output
0-10V Dimming to 5%
Dim-to-Off
Class 1 or Class 2 Control Circuit
12V or 24V 1.2W Auxiliary Output Options
~2-3W Driver Standby Power
UL Listed / Class P
IEE C kV Transient Protection
F-Can or VF-Can Housing
Programmable Dimming Features
KSP
Driver Operating Range:
KSP
KSP
Voltage
Current (mA)

14. LDPC000A Configuration Tool

15. EVERset Programming Software
Programming Solution
LDPC000A
Configuration Tool
EVERset Programming Software
PA and PWA Drivers
LDPC000A Configuration Tool
Supports wired or wireless programming
PWA drivers can be programmed either wirelessly or via a wired connection
PA drivers can only be programmed via the wired connection
Both wired and wireless programming support read/write functionality of the driver
Wired programming supports the configuration of up to 6 drivers of the same model with the same configuration at the same time
The Planned to support configuration of up to 6 drivers at the same time with a mix of different driver models

16. EVERset Programming Software

17. EVERset Programming Software
Programming Solution
LDPC000A
Configuration Tool
EVERset Programming Software
PA and PWA Drivers
EVERset Programming Software
Version is available now
Contains the “Engineering” mode for easy creation of driver profiles.
Supports read/write of compatible PA and PWA drivers.
Version is under development
Addition of “Production” mode for high volume production
Includes barcode scanning for loading profiles
Adds options for batch programming and log data
Does not allow for editing for profiles created in engineering mode
Addition of Lumen Maintenance for PA drivers

18. EVERset Programming Software
Adjustment of the output current is easily accomplished on the main tab.

19. EVERset Programming Software
Dimming Profile settings are all listed on one tab. The dimming graph will change based on changes to the dimming profile.

20. EVERset Programming Software
Luminaire profiles can be saved in the Profiles tab for easy recall to program drivers.

21. Marketing Resources
The formal launch e-blast will be sent out the week of Oct 9th for PWA drivers. PA e-blast to follow in November.
Feel free to forward the e-blast to your customers.
Collateral PDFs (for PWA) are available on PA Flyer and Spec Sheets to follow.
Product Flyer
Spec Sheets
To support the launch of the new drivers, these tactics (among others) will be in play…
LED Selector Guide
Linear Driver & Modules Brochure
Press Release
Social Media
Blueprint/PESLA Newsletters- December edition
Presentation Library

22. Thank you