1. CONSTRUCTION OF SEPAM CONFIGURATION CABLE (CUSTOM CCA783 CABLE)
6-Pin DIN (Male)
2 (Rx)
1 (Tx)
3 (Gnd)
DB-9 (Female)
3 (Tx)
2 (Rx)
5 (Gnd)
PS/2 MOUSE EXTENSION CABLE
PINOUT FOR DB9(FEMALE) CONNECTOR
PINOUT FOR 6-PIN MiniDIN CONNECTOR
Cut PS/2 Mouse male/female Extension cable ( 6ft-Belkin F2N or equal) near female end, leaving male connector attached
Use continuity tester to determine conductors attached to pins 1,2,3 of MiniDIN connector
Attach above conductors into crimp sockets of crimp type female DB9 connnector kit(Radio Shack A or equal) and insert the sockets per the figure above
Attach shield per connector kit directions and assemble into DB9 Connector Hood (Radio Shack or equal)
Use continuity tester to verify wiring per the figure above before using
Plug MiniDIN into relay front port and DB9 into PC serial port to use Softwares SFT2841 and SFT2826
04mar2005
sepam programming cable_r1.ppt