1. Uni-Vent Eagle
A Basic Set-Up Guide
November 9, 2009

2. Identify the Ventilator and its Parts
Step 1
Identify the Ventilator and its Parts
Identify the ventilator.
Identify the breathing circuit.
Identify the power supply.
Identify the oxygen hose.
November 9, 2009
Identify the air hose.

3. Step 2 Place the small clear tube onto the exhalation valve.
November 9, 2009

4. Step 3
Place the clear blue tube with elbow onto the open port next to the valve.
November 9, 2009

5. Place the clear blue tube onto the transducer valve.
Step 4
Place the clear blue tube onto the transducer valve.
November 9, 2009

6. Place the small clear tube onto the exhalation valve.
Step 5
Place the small clear tube onto the exhalation valve.
November 9, 2009

7. Place the breathing circuit onto the gas out
Step 6
Place the breathing circuit onto the gas out
(to patient) valve.
November 9, 2009

8. Step 7
Attach the oxygen hose to the valve labeled oxygen in. Make sure it is tightly secured to the valve.
November 9, 2009

9. Step 8
Attach the air hose to the valve labeled air in. Make sure it is tightly secured to the valve.
November 9, 2009

10. Step 9
Insert the power cord into the slot as seen above. Line up the two red dots to insert correctly.
November 9, 2009

11. If you have attached everything correctly it should look like this.
Step 10
If you have attached everything correctly it should look like this.
November 9, 2009

12. November 9, 2009