1. T1.3 Pilot Sites Survey and Audit, Peeter Kool CNet Svenska AB

2. Overview
M2-M12
Partners: CNet (4), CERTH-ITI (2), TECNALIA (2), PPC (4)
Deliverables: Contributes to D1.1.

3. 1 Pilot site CERTH Technalia Microgrid Lab 5 or 4 sub pilots
Not part of the actual pilot sites

4. What’s Done Testing and evaluation of sensor platforms
enOcean: Energy harvesting (no batteries), primarily for presence detection
Netvox: Wide range of ZigBee sensors (proprietary)
PlugWise: Smart Plugs + some sensors
Enistic: Power usage and actuation.
Plugs, Multi-plugs, Clamps (normally non-obtrusive)
ZWave device evaluation.
WIFI-based plugs
Current Cost (Zigbee)
Office pre-pilot started
Shutting down screens when alarm turned on
Software “Test bed”, eat your own medicine.
Creating action plan.

5. What’s Done (Cont..) Meeting at CERTH during February
Surveyed the premises and possible pilot locations
BMS connection through OPC (BacNet)
VRVs and HVAC accessible through BMS
Preliminary locations decided
ITI Building
Conference Room
Cafeteria/Smart House
Installed first measuring equipment and gateway.
Uploading data to cloud server
List of needed sensors/actuators

6. D1.1 Pilots
The pilot sites were selected depending on a number of factors which primarily involved the following priorities:
What can be measured and controlled
BMS Connection
Occupancy and usage
HVAC system layout to enable correct measurement and control
Access for installation

7. D1.1 Pilots Three main sites ITI building Conference Room Cafeteria
6 Sub-areas
Conference Room
HIT Building
Cafeteria
2 Options

8. D1.1 Pilot ITI Building

9. D1.1 Pilot ITI Building We could control We can measure
HVAC system, both internal VRVs as well as external units
Power consumption of other individual consumers
Primarily Computer equipment
In the Corridor
Water Heater/Cooler
Vending Machines
Water heater
We could control
VRV temperature set points
Lighting
Individual smart plugs
Water Heater

10. D1.1 Pilot Conference Room
Another building: CERTH-HIT
We do not have access to complete HVAC data
Not even VRV data?
We can measure
Individual smart plugs
We could control
Lighting

11. D1.1 Cafeteria Not suitable to be included in pilot Two alternativs
Kitchen in CERTH-ITI building
Smart Energy House
No details now

12. D1.1 Cafeteria Kitchen We Could control We can measure
Television/Display
Drinking water cooler/heater
Ice Machine
Refrigerator
Microwave oven
Small household appliances, i.e. heating plate and mixer.
Ventilation speed (Set manually now)
We Could control
Refrigerator? (Discussion from telco)
Ventilation speed.
Lighting

13. Devices for Pilots Device Total number 3 Phase energy meters 312
Smartplugs 47
Switch 1 7
Switch 2 9
C02
Thermometers
RFID 8
VRV 14
Humidity
Water heater measurement and control switch 1
Manual ventilation control unit
movement sensor
Light Sensor

14. Open Issues Pilot Sites Devices Smart Energy Home/Kitchen
Conference room
Devices
Luminance sensors
Depends on the actual possibility of controlling the lights
Dimmable lights (Expensive)
C02 sensors
The smart dishwasher
Where? We have recieved the first info about the interface.
Adding intelligence to the fridge/Water heater

15. Initial Pilot Implementation plan

16. Initial Pilot Implementation plan
Two main parts
INERTIA infrastructure installation plan
Required to operate and develop INERTIA
Sensor Cloud installations
Installation of sensors
Simple i.e. smart plugs
Complex, i.e. equipment that is not plug and play and requires more installation
Try to make a gradual rollout
Minimising risks

17. Initial Pilot Implementation plan
Deadline
Installation
Initial sensor platforms decided and procurement started
Local Control Hub Server and OPC BMS server installed and available.
Current test gateway configured to work with the Local Control Hub. Reuse the existing PlugWise based network as the first test case for the sensor cloud.
Connection with BMS through OPC verified. This together with the PlugWise test installation will be the bases for what can be demoed in the review
2013-?
Rollout of first fixed installations reading the 2 and 3 phase meters, i.e. covering the HVAC system.
Addition of a new gateway in CERTH-HIT building and deployment of smart plugs in all locations.
Installation of first set of fixed light controls and measurement in the Conference room
2014-?
Installation of the rest of fixed light controls and measurement in CERTH-ITI building based on the experience from the Conference Room.
Smart Energy House?

18. D1.1 Action Plan
Current ToC

19. Action Plan End September
Final “initial pilot implementation plan” finished.
Decided on initial platforms, i.e which devices to buy together with CERTH
Can we make a gradual rollout?
Final deliverable D1.1 contribution done.
23/9 ready for peer-review

20. This meeting! Agree on the pilot sites
How to deal with smart energy house
Cafeteria decided
Conference room