1. Miscellaneous Topics MEC Session, CM March 2017 at GSI J. Lühning, GSI
3D model of PANDA in maintenance area
before moving-in of cryostat
during assembly of barrel-EMC
before moving-in of central detectors
Some integration problems

2. Maintenance area before moving-in of cryostat
View onto the upstream side of the Target spectrometer. A beam (type IPB700, length 12 meters, shown here in green) will be used for installing both the cryostat and the barrel-EMC. The beam will rest on tripods, fine alignment can be done by adjusting the heights of the tripod feet.

3. Maintenance area during assembly of barrel-EMC
The IPB700 beam can be rotated about the longitudinal axis. This feature is necessary for installing the barrel-EMC slices. A gangway around the EMC is needed.
Discussion with V. Ferapontov from Protvino is going on.

4. Maintenance area before moving-in of central detectors
After removing the big installation beam the auxiliary platform will be attached to the TS. The DIRC&SciTil-barrel will be installed together with the support structure for the STT.
MVD, STT, and Bw-EMC will be assembled on the wide platform shown on the left-hand side. They will be rolled into the magnet on precision rails.

5. Some integration problems
Collision checks on CAD models
In CATIA, the collision check can be done in the Assembly Design environment by clicking on this button:
Can all CAD programs in use perform this check? If not, please ask for help.
Before posting of component models, please perform a collision check and, if the coordinate system used is not the PANDA-IP system, please indicate at least the supposed IP position.

6. Some integration problems
Routing of cables and tubes from barrel-EMC
Collision with barrel-DIRC FEE (transparent here) might be possible.
Tentative routing would be helpful now.
Is help needed?
Collision between barrel-DIRC FEE and STT- cable support
Solved? Is help needed?
Installation of beam tube
procedure?
steady support?
temporary support during moving-in of Bw-EMC?

7. Some integration problems
Routing of tubes for MVD cooling.
Space has to be allocated.
Is help needed?
water tubes
compensation solenoid

8. Some integration problems
Downstream side of TS in maintenance position, tripod supports big mounting beam
What is needed for rolling-in the Fw-EMC? A transport frame for lowering the Fw-EMC onto rails is already posted on EDMS.

9. Some integration problems
Dipole
Muon Filter FEE
Muon FEE DS door
Location of racks for Muon Detectors?
If rack position is fixed cables and hoses have to be arranged in a festoon which allows the Muon Filter to move by 2.5 meters.
View onto the downstream side of the Target Spectrometer (from north-west position)

10. Integration problems
There are many other problems which wait for a solution ...
Thank you for listening