1. Date of download: 10/13/2017
Copyright © ASME. All rights reserved.
From: Correlation Between Friction and Wear of Cubic Borone Nitride Cutting Tools in Precision Hard Machining
J. Manuf. Sci. Eng. 2015;138(3): doi: /
Figure Legend:
Illustration of (a) the cross section area and (b) equivalent cutting edge (ECE)

2. Date of download: 10/13/2017
Copyright © ASME. All rights reserved.
From: Correlation Between Friction and Wear of Cubic Borone Nitride Cutting Tools in Precision Hard Machining
J. Manuf. Sci. Eng. 2015;138(3): doi: /
Figure Legend:
Changes of friction coefficient on the rake face with tool wear for variable (a) feed rate, (b) tool nose radius, and (c) depth of cut

3. Date of download: 10/13/2017
Copyright © ASME. All rights reserved.
From: Correlation Between Friction and Wear of Cubic Borone Nitride Cutting Tools in Precision Hard Machining
J. Manuf. Sci. Eng. 2015;138(3): doi: /
Figure Legend:
Changes of friction coefficient on the flank face with tool wear for variable (a) feed rate, (b) tool nose radius, and (c) depth of cut

4. Date of download: 10/13/2017
Copyright © ASME. All rights reserved.
From: Correlation Between Friction and Wear of Cubic Borone Nitride Cutting Tools in Precision Hard Machining
J. Manuf. Sci. Eng. 2015;138(3): doi: /
Figure Legend:
Changes of the plowing effect (ratio of cutting to plowing energy) during tool wear for variable (a) feed rate, (b) tool nose radius, and (c) depth of cut

5. Date of download: 10/13/2017
Copyright © ASME. All rights reserved.
From: Correlation Between Friction and Wear of Cubic Borone Nitride Cutting Tools in Precision Hard Machining
J. Manuf. Sci. Eng. 2015;138(3): doi: /
Figure Legend:
Dependence of (a) friction coefficient on the rake face and (b) average undeformed chip thickness on the energy ratio EFC (I, II, and III—effects of changes of f, rε, and ap, respectively)

6. Date of download: 10/13/2017
Copyright © ASME. All rights reserved.
From: Correlation Between Friction and Wear of Cubic Borone Nitride Cutting Tools in Precision Hard Machining
J. Manuf. Sci. Eng. 2015;138(3): doi: /
Figure Legend:
Resolution of forces acting on the rake and flank faces [13]