1. SHARE POINT
27/07/2016

2. BASIC LAYOUT FILES Layout based on task list for the TDR.
Responsible/Contact
Prority
Remark 1)
The new blade
1.1) Design Beam element
Valencia (Carlos)
High-before TDR
1.2) Location of beam element
1.3) Joints of beam element
1.4) Prototyping
Desy (Sergio)
depends on Autoclave
2) Petals & Locking points d
2.1) Revisit locking points
Nikhef (Martin)
2.2) Desing Tool for locking inner lock.
before TDR
2.2) FEA with locking points
Valencia (Michel Angel)
2.3) Design Tooling for Handling petals
Desy (Volker)
2.4) Revisit Petal core with 1 mm pipes
3) Stiffening disk
From concept to Design
Nikhef/Valencia (Michel Angel and Jesse)
FEA
Prototype
Nikhef (Auke-Pieter)
4) Service module
4.1) Revisit concept
Valencia (Pepe)
4.2) Design patch panel (envelopes)
4.3) Pipe diameter (1mm?)
Nikhef (Afrodite/Auke-Pieter)
4.4) Bellows: validation
Nikhef
pending on 4.3
4.5) Thermal FEA service module
5) Global Structure of EC
5.1) Design
5.1) FEA for system stiffness
6) Inner cilinder
Open question on Pixel PST/Ian
6.1) Design
6.1) FEA for system stiffness

3. LAYOUT MAIN FOLDERS SUBFOLERS New Blade Cad designs Simulations
Petals & Locking Points
Physical tests
Stiffening Disk
Drive store
Service Module
Each Main folder has 3 subfolders
for Cad, simulations and tests respectively.
Information will be loaded in particular
way for each subfolder.
Global Structure
Inner Cylinder
Joints and adhesives

4. CAD FOLDER
Format subfolders of cad designs: “Name_of_the_cad_’Version’”
CAD subfolders
Files (step and report)
Global_endcap_structure_A
Global_endcap_structure.stp
CAD DESIGNS
Global_endcap_structure_B
Global_endcap_structure.ppt/.pptx/.pdf
Simplified_endcap_structure_A
Format step file: “Name_of_the_cad.stp”
Format report file: “Name_of_the_cad.ppt/.pptx/.pdf”

5. CAD FOLDER
Report file has to contain the next information as minimum :
Date: The date of the upload.
Author: Name of the designer/designers and the name of the institute he/they belong.
Update: in case of update of existing cad file, summary of main changes between old and new version.
Extra information can be included in the report file if necessary.

6. SIMULATIONS FOLDER
Format subfolders of Simulations: “Name_of_the_simulation_’Version’”
SIM subfolders
Files (step and report)
Modal_fem_ED_A
Modal_fem_ED.stp
SIMULATIONS
Modal_fem_ED_B
Modal_fem_ED.ppt/.pptx/.pdf
Thermal_sim_global_sructure_A
Format step file: “Name_of_the_simulation.stp”
Format report file: “Name_of_the_simulation.ppt/.pptx/.pdf”

7. SIMULATIONS FOLDER
Report file has to contain the next information as minimum :
Date: The date of the upload.
Author/s and institute
Summary and Goal
Simplifications: Which and why.
Materials: Define all the materials employed, and the properties needed to run the simulation.
Connections?: summary about connections employed in the model, focusing on important joints.
Constraints: Which and why.
Loads applied
Results: Summary about the results. Graphics, interpretations and conclusions.
Update: in case of update of existing simulation folder, summary of main changes between old and new version.
Extra information can be included in the report file if necessary.

8. PHYSICAL TESTS FOLDER
Format subfolders of Simulations: “Name_of_the_test_’Version’”
TEST subfolders
Files (data file and report)
Modal_free_analysis_of_petal_A
Modal_free_analysis_of_petal.txt/.xlsx
PHYSICAL TESTS
Modal_free_analysis_of_petal_B
Modal_free_analysis_of_petal.ppt/.pptx/.pdf
Impact_analysis_glue_A
Format data file: “Name_of_the_test.txt/.xlsx”
Format report file: “Name_of_the_test.ppt/.pptx/.pdf”

9. PHYSICAL TESTS FOLDER
Report file has to contain the next information as minimum :
Date: The date of the upload.
Author/s and institute
Summary and Goal
Pictures of the system under testing
Explanation of data exposed
Materials: Define all the materials employed, and the properties linked with the test.
Connections: summary about connections employed in the test, focusing on important joints.
Constraints: Define the constraints in the test.
Loads applied
Results: Summary about the results. Plots, interpretations and conclusions.
Update: in case of update of existing simulation folder, summary of main changes between old and new version.
Extra information can be included in the report file if necessary.