1. Horticulture Science Lesson 48 Growing and Forcing Easter Lilies

2. Interest Approach
Bring a lily bulb to class. Set it on the front desk or table. Curious students will ask what it is as they enter the classroom. Avoid giving them the answer until the attention and curiosity of the entire class has grown. Then ask if any of them ever have Easter lilies in the spring. Ask what they know about Easter lilies. The
discussion can range from religious uses to Easter lilies that have been planted in the garden.

3. Student Learning Objectives
Describe Easter lilies in general.
Explain how Easter lilies are propagated.

4. Student Learning Objectives
Discuss the pre-cooling treatment Easter lilies are given prior to potting.
Explain the major steps in growing and forcing Easter lilies.

5. Student Learning Objectives
Identify major Easter lily pests and disorders as well as controls.

6. Terms ‘Ace’ basal plate bulblets bulbs case cooled by forcer
case cooled by supplier
controlled-temperature forcing (CTF)

7. Terms Easter lilies forcing leaf counting natural cooling
‘Nellie White’
non-precooled bulbs
non-tunicate bulbs

8. Terms
precooled bulbs
scales
scalettes
vernalization

9. What is the general background of the Easter lily?
Easter lilies are grown in the United States and Canada as potted plants for the Easter holiday.
They are valued for their large white, fragrant, trumpet-shaped flowers borne on a single stem.

10. What is the general background of the Easter lily?
The two most popular varieties are ‘Nellie White’ and ‘Ace.’
1. ‘Nellie White’ grows shorter than ‘Ace.’
2. ‘Nellie White’ produces about seven to eight flowers from a 10- to 11-inch bulb, while ‘Ace’ produces around nine flowers from a 10- to 11-inch bulb.
3. ‘Nellie White’ is cooled at 44 to 46°F, and ‘Ace’ is cooled at 39 to 41°F.

11. What is the general background of the Easter lily?
Easter lilies are a relatively difficult crop to grow because Easter falls on a different date each year.

12. What is the general background of the Easter lily?
Easter lilies are bulbs or short, flattened stems that bear fleshy, food-storage leaves.
More specifically, they are non-tunicate bulbs, meaning they lack a covering that would conceal and protect the scales.
The bulbs consist of numerous scales, which are modified leaves that store food and water.
The scales are held together at the bottom of the bulb by a hardened portion of stem tissue known as the basal plate.
Easter lilies are produced along the Pacific coast of California and Oregon where the weather is cool and wet all year.

13. What is the general background of the Easter lily?

14. How are Easter lilies propagated?
Propagation is done asexually by bulblets and scalettes.
Bulblets are small bulbs that form along the underground stem of a mature lily.
Scalettes are small bulbs produced from the scales that have been removed from the basal plate of a bulb and planted.

15. How are Easter lilies propagated?

16. How are Easter lilies propagated?
It takes three years to produce a commercial bulb from a bulblet or scalette.
Easter lily bulbs are measured in circumference and sold in sizes of 6 1/2 to 7; 7 to 8; 8 to 9; 9 to 10; and 10 to 11 inches.

17. What is the pre-cooling treatment Easter lilies receive prior to planting?
Easter lily bulbs require a cold period or vernalization in order to flower.
The vernalization period for Easter lilies is 1,000 hours or around six weeks of cold temperatures.
Once cooled, the bulbs are forced.
Forcing is a term used to describe conditions given to get bulbs to grow and flower.

18. What is the pre-cooling treatment Easter lilies receive prior to planting?
Suppliers provide bulbs that have been pre-cooled or bulbs that are said to be non-precooled.
1. Pre-cooled bulbs have been given the necessary amount of cold treatment to flower.
2. Non-precooled bulbs have not been given cold treatment.

19. What is the pre-cooling treatment Easter lilies receive prior to planting?
There are four accepted methods of cooling Easter lilies.
1. Controlled-temperature forcing (CTF) is a method whereby the grower purchases non-precooled bulbs and pots them upon arrival.
They are given 63°F temperatures for three weeks.
Then they are cooled for a thousand hours before forcing.
2. Natural cooling involves potting non-precooled bulbs upon arrival.
They are cooled naturally in a poly-house or outside.
3. Case cooled by supplier indicates the supplier has cooled the bulbs in their packing cases.
These are potted on arrival and forced.
4. Case cooled by forcer indicates the bulbs are received by the grower, kept in their packing cases for cooling, then potted and forced.

20. What are the major steps in growing and forcing Easter lilies?
Growing and forcing occurs after the bulbs have received the required cold treatment.
Potting and medium selection are important in Easter lily production.
1. Six-inch lily pots are commonly used.
2. The medium should have a high bulk density and have a pH between 6.5 and 7.0.
3. When potting the bulbs, place them near the bottom of the pot, which encourages the formation of stem roots that help stabilize the plant.

22. What are the major steps in growing and forcing Easter lilies?
Water the Easter lilies infrequently at first, allowing the medium to dry between waterings.
Fertilize at 250 ppm nitrogen and potassium if soilless medium is used and 200 ppm N and K if the medium contains soil.
For controlled temperature forcing and natural cooled bulbs, give the bulbs 50 to 60°F temperatures, cool, then force.
Precooled and case cooled bulbs are potted, placed under 50 to 60°F temperatures for one to two weeks, and then forced.

23. What are the major steps in growing and forcing Easter lilies?
1. It normally takes between 110 and 115 days to force an Easter lily crop.
2. Greenhouse temperatures influence the rate of forcing.
Warmer temperatures speed development.
3. Typically, Easter lilies are forced at 63 to 65°F nights.
4. With late Easters, bulbs are forced at around 60°F nights.
5. Flower buds should be visible around Ash Wednesday.
6. Leaf counting is a practice used to monitor the progress of a crop.
It involves marking, counting, and removing leaves.
7. DIF and growth retardants, including A-rest, are effective in controlling the height of Easter lilies.

24. What are the major steps in growing and forcing Easter lilies?

25. What are major Easter lily pests and diseases and some means of control?
Easter lilies have mite, insect, fungus, and virus problems.
Bulb mites are a serious problem that can stunt or deform plants.
A recommended control is for the forcer to dip the bulbs in a miticide prior to planting.

26. What are major Easter lily pests and diseases and some means of control?
Insect pests include aphids and fungus gnats.
Root rot caused by the Rhizoctonia fungus can be a problem, particularly if the growing medium is kept too moist.
Botrytis can damage the flowers.
Virus infections are also known to deform flowers.

27. Review/Summary What is the general background of the Easter lily?
How are Easter lilies propagated?

28. Review/Summary
What is the pre-cooling treatment Easter lilies receive prior to planting?
What are the major steps in growing and forcing Easter lilies?

29. Review/Summary
What are major Easter lily pests and diseases and some means of control?