1. Pyramic® & Solex® Systems

2. Pyramic Base Coat Tinted Base Coat
Ensures Contractor Applies Coating at Proper Coverage Rates By Visually Identifying Where The Finish Coat Needs To Be Applied Heavier

3. Pyramic Cool Roof Coatings Bleed Blocking Properties
Help Reduce Building Energy Costs
Provide UV Protection for Membrane System
Extend the Life Cycle of the Waterproofing Membrane
Bleed Blocking Properties
Prevents Asphalt Oils From Discoloring Top Coat Ensuring White Reflective Roof Surfacing

4. Solex Benefits of Solex Excellent Stain Resistance
Excellent Color Stability
Highly Reflective Surfacing (SRI 114)
Durable Kynar® Aquatec Resin
Solar Reflective Index (SRI)
LEED® Min 78
Pyramic 106
Solex 114

5. Surface Preparation
The Surface Must Be Clean, Sound, Dry and Free of Any Materials That Would Inhibit Proper Adhesion of The Coating. To Achieve a Suitable Surface, Prior To The Application of The Coating, The Use of INDUSTRIAL CLEANER, Scraping, Power Booming, Vacuuming or Other Means May Be Required. Cleaning Should Always Be Performed Observing Responsible Trade Practices and Cleaner Residue From Incomplete Rinsing of Low Lying Areas Should Be Avoided. In Any Case, Any Existence of Talc or Other Separator Agents on The Roofing Surface Is Not Acceptable.

6. Features & Benefits Increased Reflectivity Fire Resistant/Fire Rating*
Protects Against UV Exposure and Premature Aging Of Membrane
Reduces Roof Degradation
Provides Additional Energy Savings
Fire Resistant/Fire Rating*
Meets ASTM E 108 Class A At 2:12 Slope For: Gallon of Pyramic With ½ Gallon Top Coat of Solex
Meets ASTM E 108 Class A At 1:12 Slope For: Gallon of Pyramic With Gallon Top Coat of Pyramic
Meets ASTM E 108 Class A At 1:12 Slope For: Gallon of Pyramic Base Coat With Gallon Top Coat of Pyramic and/or Solex
FM Approvals*
Approved Over All Garland Hot Asphalt, Weatherking, Green-Lock and Torch Systems, For Solex and Pyramic Systems, As A Coating System
Low Odor
Pyramic Base Coat < 50 g/l VOC Content
Pyramic < 50 g/l VOC Content
Solex < 50 g/l VOC Content
Approval Note: Approvals Are Specific To Construction Design and Products Contained In The Assembly Please Contact Your Local Garland Technical Representative For Project Specific Approvals.

7. Application Rates Traditional Pyramic System Solex System
Pyramic Base Coat at Gallons Per Square (3.7 – 5.6 l) (16-24 Wet Mils)
Pyramic at Gallons Per Square (3.7 – 5.6 l) (16-24 Wet Mils)
Solex System
Solex at 0.5 Gallons Per Square (1.85 l) (8 Wet Mils)

8. Temperature Difference

10. Summary
Pyramic Base Coat, Pyramic & Solex are Water Based Roof Coatings Designed to Improve the Life Cycle and the Energy Efficiency of Your Roof By Reflecting the Sun’s Harmful Rays
These Systems Provide a White ENERGY STAR®, Title 24, LEED®, and CRRC Rated, Reflective Surface
These Systems Can Save Your Customer Money By Reducing the Building’s Operational Energy Costs
These Systems Will Extend The Life Of Your Roofing System By Reducing The UV Degradation of Your Membrane