1. Pilot Watcher Product Overview V5.3

2. Contents
Overview
Product Details
Main Features
Conclusion

3. Product Introduction
Pilot Watcher is a software based solution that is used to locally monitor the performance and measurement of DingLi remote measurement equipment’s test modules. Pilot Watcher runs on an Android tablet and can be connected to a Pilot RCU, Pilot RCU Light, and Pilot Scout through WiFi (via a device hotspot) for real-time service test monitoring. Users may monitor the onsite test modules’ parameters, events, MOS score, alarms, GPS-based test routes, test plans, etc., and reboot the Pilot RCU device through Pilot Watcher.
Pilot Watcher can be connected to only one test equipment for monitoring at one time.

4. Recommended Tablet
The image shown here is for illustrative purposes only. Any Android tablet with the recommended specifications can be used.
Recommended specifications:
Operating System: Android 4.0 or later
Screen Size: 7-10-inch screen recommended to ensure good visualization

5. Contents
Overview
Product Details
Main Features
Conclusion

6. Pilot Watcher System Architecture
Android Tablet
Pilot RCU
Control Interaction
Wi-Fi Connection
Data Interaction
Test Plans
Status
Data
System Architecture
Pilot Fleet Unify

7. Software Operation
Once installed, users may find and tap Pilot Watcher installed on the tablet to run it.

8. Main Interface Test channel management Connect device for service test
View alarms
View modem configuration
View test device information
Reboot test device

9. Version Compatibility
Pilot RCU 2.0: Version or later versions. Pilot RCU2.0 (quad-core) is recommended.
Pilot RCU Light 3.0: Version or later versions
Pilot Scout 2.0: Version 9.10 or later versions
Pilot Scout 2.1: Version or later versions

10. Contents
Overview
Product Details
Main Features
Conclusion

11. Monitor Measurement Parameters
Monitor measurement parameters of test modules
Measurement parameters decoded by the test module, and uploaded to the tablet through WiFi
Monitor parameters of two test modules at the same time (e.g. MO and MT modules)

12. Monitor Measurement Events
Monitor measurement events of test modules
Measurement events decoded by the test module, and uploaded to the tablet through WiFi
Monitor events of two test modules at the same time (e.g. MO and MT modules)

13. Monitor Layer 3 Messages
Monitor Layer 3 messages of test modules
Layer 3 messages decoded by the test module, and uploaded to the tablet through WiFi
Monitor Layer 3 messages of two test modules at the same time (e.g. MO and MT modules)

14. Monitor Alarms
Information about device connection and test plan displayed under Status.
Basic device status and module rebooting exceptions displayed under Device Alarm

15. Customize Parameters for GPS Test Route
Users may customize the threshold and display color for the measurement parameters to be displayed in the Map window.

16. Monitor GPS-Based Test Route
Real-time GPS-based measurement route and automatic cell line linking after importing site database
Measurement data with GPS geo-location can be displayed on the map
Line to serving cell between test location and corresponding serving cell

17. Monitor Real-time Serving Cell Lines
Users may import cell files and monitor the line to serving cells between serving cells and test modules.
It is recommended to obtain the latest site database from operators.

18. Monitor MOS Scores
Monitor real-time MOS scores .

19. View Test Device Information
View test device information including
Device ID
Kernel version
Disk space
GPS status
Files to upload

20. View Test Plans View test plans of each test module
Display major information of the test plan
Note: This version does not allow test plans to be edited. Its only for viewing purposes.

21. View Modem Information
View information about Modem configuration
RAS and APN information
Server IP and port
Log file partition mode
Note: This version does not allow Modem configuration to be edited. Its only for viewing purposes.

22. View Pre-defined Test Route
Import the pre-defined test route (*.KML/KMZ format) to the Map window, which will be displayed in grey
Conduct service test based on pre-defined test route

23. Control Service Test
When Pilot Watcher is connected to a test device, users may manually pause, stop, or restart the service test.

24. Reboot Test Device
When Pilot Watcher is connected to a device, users may send a reboot command to the test device from Pilot Watcher. The test device will reboot when receive the command.

25. Conclusion 1 2 3 4 5 Real-time network and test device monitoring
Portable, easy to operate, with user friendly interface 3
No restrictions on public network as it is connected to test device through WiFi (device hotspot) 4
Efficient way for technician to troubleshoot the onsite remote measurement probe 5
Another option to evaluate the test modules performance locally, other than waiting for alarms report from administrator