1. DVB-T/DVB-T2
BIII TRANSMISSION EQUIPMENT

2. Low Power DVB-T VHF BIII Transmitters Range
Model 3D0K1A
Power Range 10W- 100W
Digital Adaptive Precorrection
Broadband all over VHF BIII
MFN and SFN Operation
Software upgrade to DVB-T2
Seamless input switching
Efficient low noise forced air cooling
3.5” touch screen control panel
1+1 and N+1 management system
Internal GPS receiver available
SNMP & Web Server remote operation
Power consumption 100W: 550W 2 2

3. Medium Power VHF BIII Transmitters Range (1)
Model 3D0K4A
Power Range 250W- 400W
Digital Adaptive Precorrection
Broadband all over VHF BIII
MFN and SFN Operation
Seamless input switching
7” touch screen control panel
Efficient low noise forced air cooling
Internal GPS receiver available
SNMP & Web Server remote operation
Efficiency up to 35%
Dual Exciter option available
1+1 and N+1 management system
Software upgrade to DVB-T2
One single HPA Module:
Two pallets
One power supply 3 3

4. Medium Power VHF BIII Transmitters Range (2)
Model 3D0K8A
Power Range 500W- 800W
Digital Adaptive Precorrection
Broadband all over VHF BIII
MFN and SFN Operation
Seamless input switching
7” touch screen control panel
Efficient low noise forced air cooling
Internal GPS receiver available
SNMP & Web Server remote operation
Efficiency up to 35%
Dual Exciter option available
1+1 and N+1 management system
Software upgrade to DVB-T2
One single HPA Module:
Four pallets
Two power supplies 4 4

5. Medium Power VHF BIII Transmitters Range (3)
Model 3D1K6A
Power Range 800W – 1600W
Digital Adaptive Precorrection
Broadband all over VHF BIII
MFN and SFN Operation
Seamless input switching
7” touch screen control panel
Efficient low noise forced air cooling
Internal GPS receiver available
SNMP & Web Server remote operation
Efficiency up to 35%
Dual Exciter option available
1+1 and N+1 management system
Software upgrade to DVB-T2
Two HPA Modules, each one:
Four pallets
Two power supplies 5 5

6. High Power VHF BIII Transmitters Range
Model 3D2K5A
Power Range 2500W- 3500W
Digital Adaptive Precorrection
Broadband all over VHF BIII
MFN and SFN Operation
Seamless input switching
7” touch screen control panel
Efficient low noise forced air cooling
Internal GPS receiver available
SNMP & Web Server remote operation
Efficiency up to 35%
Dual Exciter option available
1+1 and N+1 management system
Software upgrade to DVB-T2
Two HPA Modules, each one:
- Six pallets
- Six power supplies
Isolation Transformer on board 6 6

7. Control Panel User-friendly interface Exciter status and set-up
7” touch screen display
User-friendly interface
Exciter status and set-up
HPA module status and set-up
Power/time view
Temperature/time view
Event history 7 7

8. Remote control and monitoring system
User-friendly interface
Protected access to system
Web server and SNMP protocol
Mobile
Application 8 8

9. General Specifications
Frequency Band VHF BIII ( MHz)
Power supply VAC or 400/ 230 VAC 3-phase 50 Hz ±1%
Cooling System Forced air
Operating temp. range +0°C to +45°C
Permissible relative humidity 95%, non-condensing
Local control 7” Touch-screen graphical display
Remote control Web-Server (IP) and SNMP agent
Protection against VSWR, Temperature, Overdrive, Overcurrent
Clock & Synchronization 10MHz & 1PPS (optional: on-board GPS)
Efficiency 35% Typical
Standards DVB-T: EN300744, TS101191, DVB-T2: EN302755, TS102831
Transmission Modes MFN, SFN-SISO, SFN-MISO
Modulation Modes Syst. A, Syst. B MONO & HYBRID, Multi-PLP
Constellation QPSK, 16QAM, 64QAM, 256QAM (Normal or Rotated)
Available Inputs 2 x ASI Inputs x BNC 75OHM seamless switching
MER ≥ 34dB
Shoulders ≥ 38dB (before output filter)

10. ELECTROLINK Srl
Via delle Acacie - Orvieto (Italia)‏
Tel