1. Luebeck, June 2011 Katrin Mett
Image
H 9.4 cm x W 9.16 cm
Image
H 9.4 cm x W cm
Transport and Mounting possibilities Evita V300 and Evita Infinity V500
Luebeck, June 2011 Katrin Mett

2. Mobile and integrated
Provide a high level of ventilation therapy during intra hospital transport – that’s mobility provided by the VN500/V500
Promote faster and safer transport with these easy to use transport components
Gas Supply Unit (GS500)
Power Supply Unit (PS500)
Transport Supply Unit (TSU)
Achieve safer transport using reliable solutions
Simultaneous independence from gas and power
Uninterrupted high-quality respiratory care
Easy to set-up
Webinar Mounting V500/VN500

3. Ready for back-up and transport
Infinity® C500
Ventilator V500 / VN500
GS500
PS500
Transport Supply Unit
Webinar Mounting V500/VN500

4. PS500 Power Supply Unit – Technical Data
PS500 consists of
4 Maintenance Free Valve Regulated Lead Acid Batteries
Weight 27 kg
Width x Height x Length (290 x 163 x 370) mm
Capacity Ah
Voltage 24 Volts
Charging Time average 11 hours
Webinar Mounting V500/VN500

5. PS500 Power Supply Unit – Battery Life
PS500 without GS500
240 minutes
(full charge/new battery)
PS500 with GS500*
Approximately 120 minutes
Webinar Mounting V500/VN500

6. PS500 Power Supply Unit – Service Interval
Every 90 days
Battery check
Every 12 months
Physical check
Every two years
Replacement of batteries
Webinar Mounting V500/VN500

7. PS500 Power Supply Unit - Cord Management
One power cord from the V500 or VN500 ventilator is connected to the electrical socket
A side channel is utilized to bring power to the external battery. This side channel prevents the need for multiple cords into the hospital electrical system.
Webinar Mounting V500/VN500

8. PS500 User Interface Screen
The battery icon on left indicates battery strength and PS500 available for use.
Webinar Mounting V500/VN500

9. PS500 User Interface Notification
A high priority alarm will be activated upon PS500 being activated for interruption in standard electrical supply.
This alarm can be silenced – visual alarm to become blue thereafter indicating external battery is in use.
Webinar Mounting V500/VN500

10. No user interface interaction necessary, completely automatic
GS500 Gas Supply Unit
No user interface interaction necessary, completely automatic
Can be used for continuous operation or back-up*
For transport use only with PS500
Rotation speed adapts to current breathing mode and patient type
Low energy consumption, Less bulky
Reduced noise compared to compressors
Webinar Mounting V500/VN500

11. GS500 Gas Supply Unit - Supply Gas Management
A second supply channel incorporated into the backbone of the trolley is used for the GS500.
Webinar Mounting V500/VN500

12. GS500 and PS500 Operating instructions
Ready for transport
start GS500 via Transport-Button in dialog Special Procedures or simply remove gas hoses from central gas supply
PS500 will start when disconnecting the main power source
Back-up gas and power provided automatically
Webinar Mounting V500/VN500

13. Benefits Workstation CC and NC with PS500 and GS500
No user interface interaction necessary, completely automatic
Can be used for continuous operation or back-up*
For transport use only with PS500
Rotation speed adapts to current breathing mode and patient type
Low energy consumption, less bulky
Reduced noise level compared to compressors
Webinar Mounting V500/VN500

14. Gas Supply TSU - Transport Supply Unit
Hand cart for two gas cylinder for use with VN500, V500, EvitaXL und Savina 300
Maximum height of the compressed gas cylinders including valves mm
Minimum diameter of the compressed gas cylinders
80 mm
Maximum diameter of the compressed gas cylinders mm w/o bed coupling mm with bed coupling
Maximum load kg
Webinar Mounting V500/VN500

15. Gas Supply Cylinder holder
Can be used with
Evita Infinity V500
Babylog V500
Evita XL with new trolley
Savina 300
Webinar Mounting V500/VN500

16. Bed coupling Designed for beds, incubators and warming beds
For use with VN500, V500, EvitaXL and Savina 300
Swivel possibility to uneven pavements
Can be mounted at the trolley
Webinar Mounting V500/VN500

17. Bed coupling Rail clamp for bed
Fits horizontal rails, bed poles, incubators and warming beds.
Can be ordered separately to stay with the bed
Webinar Mounting V500/VN500

18. Mova Cart 2.0 Solution Lift or docking version available
Adaptition of Evita XL and Evita 4
Adaptation of Evita V500 or Babylog VN500 via an additional fixation plate
New integrated rounded corners
New ergonomic handle position
Improved cable management
Self closing drawer improve the comfort
Use as dock or lift variant for ceiling pendant
Webinar Mounting V500/VN500

19. Mounting front rail M26 arm for front rail use
Assembly at front rail with bracket of V/VN
Supporting frame
or supporting frame with bail
Webinar Mounting V500/VN500

20. Mounting console M26 arm with different
rear adapters and front adapters
Console, ventilator not fixated
Webinar Mounting V500/VN500

21. Mounting 38mm pole M26 arm for 38mm pole use
Assembly plate with 2 adapter
Supporting frame
or supporting frame with bail
Webinar Mounting V500/VN500

22. Accessories for our Mounting System M26
VESA standard interface 75x75mm (all VESA arm variants
Standard norm rail: height 25mm, depth 10mm, length 300mm;
Description
Technical data: dimension (HxDXL) 90mm x 40mm x 300mm; maximum load 10kg; weight 1,8kg
Adapter for V500/VN500 Cockpits and other accessories, which are mountable on a standard rail
Order No°
G24627
Additional information in SalesView:
Webinar Mounting V500/VN500

23. Thank you for your attention.