1. General Permits and General Operating Permits under construction
September 2017

2. New General Permits (GP/GOP) Approved in 2017
No.
General Permits
Comments
Status
GP-017A
Boiler(s) and Heater(s) each less than 5 MMBTU per hour
Revised to implement MACT 6’Js for Industrial, Commercial and Institutional boilers.
This GP replaced the existing GP-017.
Effective Date:
March 20, 2017
GP-018A
Boiler(s) and Heater(s) each greater than or equal to 5 MMBTU per hour and less than 10 MMBTU per hour
To implement MACT 6’Js for Industrial, Commercial and Institutional boilers.
This GP replaced the existing GP-018.
August 07, 2017
September /2017 |Division of Air Quality | NJDEP

3. General Permits (GPs) under Construction
No.
General Permits
Comments
Status
GP-004B
Fuel Dispensing facilities for Stage I only
To revise this GP to be in accordance with the revised regulation, Subchapter, 16.3 for Gasoline Transfer Operations. This rule will eliminates the installation of Stage II Vapor recovery system in Gas Stations.
Developing General permit.
Availability date: Beginning of 2018
GP-016A
Manufacturing and Materials Handling Equipment (Former SEGAP)
To revise this GP to make it more flexible and friendly use.
This GP will replace three existing GPs:
GP-016, SEGAP
GP-002, Confined Abrasive Blasting Equipment
GP-003, Woodworking Equipment
Developing online design.
Availability date: Dec 4, 2017
September /2017 |Division of Air Quality | NJDEP

4. General Permits (GPs) under Construction
No.
General Permits
Comments
Status
GP-015A
Non MACT Plating Operations
To revise the existing GP name eliminating misinterpretation of applicability and to implement MACT requirements
This GP will replace GP-015.
Permit text and compliance plan under development
GP-009B
Boiler(s) and Heater(s) each greater than or equal to 10 MMBTU per hour and less than 50 MMBTU per hour
To implement MACT 6’Js for Industrial, Commercial and Institutional boilers burning No.2 Fuel oil.
To include Boilers burning No.2 fuel oil
Automatic PTE calculations
This GP will replace the existing GP-009A.
Effective Date:
Beginning / mid 2018
September /2017 |Division of Air Quality | NJDEP

5. General Permits (GPs) under Construction
No.
General Permits
Comments
Status
GP-019A
Portable Equipment
To simplify and incorporate Subchapter 8 changes and allows multiple equipment.
This GP will replace GP-019.
TBD
GP-008A
Site Remediation Activities for Gasoline Contamination at Vehicle Fueling Stations (SVE)
To revise it and make it available for five years only; That would eliminate the existing several versions of GP-008
September /2017 |Division of Air Quality | NJDEP

6. General Operating Permits (GOP) Approved
No.
General Permits
Comments
Status
GOP-008
Boiler or Heater greater than or equal to 5 MMBTU per hour and less than 10 MMBTU per hour
New GOP to implement MACT 6’Js for Industrial, Commercial and Institutional boilers.
Effective Date: August 07, 2017
September /2017 |Division of Air Quality | NJDEP

7. General Operating Permits (GOP) under Construction
No.
General Permits
Comments
Status
GOP-002A
Manufacturing and Materials Handling Equipment
(Former SEGAP)
To revise it and make it more flexible and friendly use.
This GOP will replace existing GOP-002, SEGAP.
The comment period ended on:
April 20, 2017
Working on online design
GOP-009
Boiler OR Heater each greater than or equal to 10 MMBTU per hour and less than 50 MMBTU per hour
To implement MACT 6’Js for Industrial, Commercial and Institutional boilers burning No.2 Fuel oil.
To include Boiler or Heater burning No.2 fuel oil
Automatic PTE calculations
Effective Date:
Beginning / mid 2018
September /2017 |Division of Air Quality | NJDEP

8. Contact Information
General Permit Help Line
(609)
General Operating Permit Help Line
(609)
September /2017 |Division of Air Quality | NJDEP