1. Fertilisers

2. Learning outcomes Why use fertilisers What are fertilisers
Two main types of fertilisers
Organic and inorganic fertilisers
How to use fertilisers

3. ‘any substance used to fertilise the soil, especially a commercial or chemical manure.’

5. Fertilisers are concentrated sources of plant nutrients, usually in compact form such as pellets, granules, powders or liquids. They are used to improve plant growth and yields.

6. Why use fertlisers
In your paired groups list as many ways you can, why we use fertlisers.

7. Why use fertlisers
Fertilisers are used to improve plant growth. The faster growing the plant, the more it will benefit from fertiliser application. If you have a healthy soil, it is often not necessary to use fertilisers, but using them may produce a showier display of blooms or a higher yield of produce from edible crops.
Fertilisers are also used where plants are showing signs of nutrient deficiency, usually shown by leaf yellowing or discolouration in varying patterns for different nutrients.

8. Cont...
Remember that healthy soil structure and pH are just as important as fertiliser application in the prevention of plant nutrient deficiencies. Soil conditioners such as manure and compost help the soil to form into crumbs with spaces for air and water between them, making nutrients, water and air all more available to plant roots. Lime is added to remedy acidity.

9. Main plant nutrients
In your group list the main plant nutrients and how they improve the plant health.

10. What are fertilisers
Fertilisers contain concentrated sources of plant nutrients in chemical or organic form. Most contain major plant nutrients, which plants need in relatively large amounts. Some also contain trace elements, which plants only need in tiny amounts.
Most fertilisers are based on the three major plant nutrients: Nitrogen (N): For green leafy growth Phosphorus (P): For healthy root and shoot growth Potassium (K): For flowering, fruiting and general hardiness

11. Cont......
All fertilisers should quote their N:P:K ratio on the product packaging. For example, a ratio of 20:20:20 indicates a balanced fertiliser (in this instance Chempak formula 3), but a ratio of 10:12:24 would indicate a high potassium fertiliser (in this case Chempak Rose Food). However the N:P:K can be misleading if they refer to phosphates and potash, rather than phosphorus and potassium

12. Two main types of fertilisers
There are two main types of fertilisers:
inorganic (man made)
organic (derived from plant or animal).
In your group try to list any inorganic and organic fertlisers

13. Inorganic fertilisers: These are synthetic, artificial forms of plant nutrients or naturally occurring mined minerals. Inorganic fertilisers are usually more concentrated and faster acting than organic fertilisers. Examples of inorganic fertilisers include: Growmore, Miracle-Gro, Phostrogen, Sulphate of Ammonia, Sulphate of Potash, and Superphosphate and Tomorite

14. Organic fertilisers: These are derived from plant or animal sources and contain plant nutrients in organic form. Organic products tend to be slower acting, as large organic molecules have to be broken down by soil organisms before the nutrients within them are released for plant use. Examples of organic fertilisers include: seaweed, hoof & horn, dried blood, fish blood & bone, bone meal, poultry manure pellets and liquid comfrey or nettle feeds.

15. Inorganic and organic fertiliser can be found as the following types of products
Compound fertilisers: These contain a mixture of different nutrients, and may be balanced (containing similar proportions of all the major plant nutrients) or may supply more of some nutrients than others, as per the requirements of different crops. They may be organic or inorganic, or contain both.
Straight fertilisers: These contain only one or mainly one nutrient. They are usually used to provide different nutrients at different times of the year, or to correct particular nutrient deficiencies. They are usually inorganic.

16. Controlled release fertilisers: These are almost always granules of inorganic fertilisers coated with a porous material such as sulphur or synthetic resin. Water enters the granule and the fertilisers leach out into the surrounding soil. The warmer the soil, the faster the leaching; this corresponds to plant growth which is faster in warm weather. By varying the thickness of the coating granules can be designed to feed plants for different periods of time.
Slow release fertilisers: These degrade slowly, usually under the influence of soil micro-organisms to release their nutrients and again are dependant on soil temperature. These are usually organic and include hoof & horn and bone meal.

17. How to use fertlisers
There are many ways to apply fertilisers, and the method you choose will greatly depend on the product you are using. Here are some of the most common methods of application, along with examples of when you would use this method.

18. Top dressing: This is the application of quick-acting fertilisers to the soil surface around plants to stimulate growth, and is usually carried out in spring at the start of the growing season. Take care to avoid leaf contact, which can cause scorching, and to protect against over application, which could cause root damage and pollution of ground water.

20. Base dressing: This is the incorporation of fertiliser into the soil or potting compost before sowing or planting.

22. Watering on: Liquid fertilisers or soluble powders and granules can be dissolved or diluted and watered onto plant roots during the growing season to give them an instant boost. They are mainly used for feeding glasshouse crops, pot plants and bedding. The nutrients in liquid fertilisers are instantly available. Care must be taken to avoid leaf contact, which can cause scorching.

24. Foliar feeding: This is the application of a dilute solution of fertiliser to the leaves of plants, useful as an emergency treatment for correcting nutrient deficiencies or for providing quick supplementary feeding. The absorption of liquid fertiliser is greatest where leaf surfaces are tender, particularly on the under surfaces of leaves or on young leaves that are just expanding. Foliar feeds should not be applied in bright sunlight because the foliage may be scorched.

26. Research group activity
Using the Learner Resource Centre research how Mycorrhizal fungi increases growth and yields in plants. Compare it with inorganic fertilisers and question is this the way forward to help reduce damage to the environment. You are to produce your finding using a power point presentation to the rest of the groups.