1. Installing an Xbox 360

2. You will need to connect the controller by pressing the search buttons on the Xbox 360 and the controller. Before doing this please put in you 2 AA batteries.
2. This the power block, this will need to be connected to the plug and the Xbox.
1. This is the plug for the power block, you will need to plug this in to the wall, make sure the power off when you plug it in.
5. If you want to use Xbox live you will need a Ethernet cable like this or a wireless adaptor. For the Ethernet cable, plug one end in the Xbox and the other in the TV. For a wireless adaptor, plug it in and then after setting up the Xbox go to setting and search for your router
3. That is the scart lead, this connects the TV to the Xbox. You will need to plug the coloured wires into the TV, red to red, white to white and yellow to yellow. The other bit goes into the Xbox 360.