1. Drafting with Weaving Software #2 Enter Data
Threading, treadling, tie-up, dents, and color.
Questions:
Insert/ Delete keys will insert/delete ends, picks, treadles. (Yes/No)
Blank ends, picks, and treadles are allowed. (Yes/No)
(check program version #’s used for illustrations)
program version #’s show which version was used for illustrations
©Judie Eatough 2005

2. Drafting with Weaving Software #2 Data Entry
View by topic:
2. Enter Data
View by weaving program
WeaveIt Basic/Pro
Illustrations: program version #’s
(check program version #’s used for illustrations)
program version #’s show which version was used for illustrations
©Judie Eatough 2005

3. WeaveIt Basic/Pro 2. Enter Data
2a. Editors
2b. In View
2c. Keyboard
2d. Draw and Line
2e. Repeats
2f. Tieup
2g, h, i. color
2j. thickness
2k. Treadle ‘As Drawn In’
Insert/Delete OK*
Blanks OK
*In select mode
*Not in the tie-up
©Judie Eatough 2005

4. WeaveIt Basic/Pro 2a. Enter Data
Editors
Two colors are available with right and left mouse clicks as shaft/treadle information is entered. Colors can be changed as desired.
©Judie Eatough 2005

5. WeaveIt Basic/Pro 2b. Enter Data
In View
Edit draft with one color warp (left click) one color weft (right click), change colors as desired. Draft and color information is added at the same time.
©Judie Eatough 2005

6. WeaveIt Basic/Pro 2c. Enter Data
Keyboard
Shafts/Treadles Keyboard
1 to 10 1 to 9 to 0 row of numbers
11 to 20 Ctrl + 1 to 0 row
21 to 30 Ctrl and Alt + 1 to 0 row
31 to 32 Shift + 1 to 2
Shafts/treadles are added at the end of the draft. Can be used in the individual editors or ‘In View’.
Now I can see the spaces
©Judie Eatough 2005

7. WeaveIt Basic/Pro 2d. Enter Data
Draw and Line
Use in Editors or In View
Draw produces a freehand curve.
Click and drag between two points for a line.
©Judie Eatough 2005

8. WeaveIt Basic/Pro 2e. Enter Data
Repeats
Threading and treadling may be entered as repeats. Screen display will show full draft.
©Judie Eatough 2005

9. WeaveIt Basic/Pro 2f. Enter Data
Tieup
From the tieup editor:
Create your own, fill with standard tieups, flip, wrap, and enter first treadle.
In View:
Standard tieups not available.
Both:
Make a selection and copy/paste/modify only part of the tieup-invert, flip, wrap.
©Judie Eatough 2005

10. WeaveIt Basic/Pro 2g. Enter Data
Color
In the editors two colors can be used with right and left mouse clicks.
In View editing allows one color warp and one color weft.
Colors may be changed at any time.
©Judie Eatough 2005

11. WeaveIt Basic/Pro 2h. Enter Data
Color
Design  Color & Weave
Color repeats can be added to the draft.
Four pre-defined and a user defined sequence.
Choose 4 colors from color palette.
©Judie Eatough 2005

12. WeaveIt Basic/Pro 2i. Enter Data
Color
Design  Color Sequence
Color sequences can be entered by width in threads or inches.
Colors are selected from the palette
©Judie Eatough 2005

13. WeaveIt Basic/Pro 2j. Enter Data
Thickness
Project  Yarn Selection
A sett is entered for each yarn.
Example: Gray yarn has a sett of 12 and red yarn has a sett of 6.
Display shows thickness
©Judie Eatough 2005

14. WeaveIt Basic/Pro 2k. Enter Data
Treadle ‘As Drawn In
Edit  Treadle ‘As Drawn in’
Color sequences can be applied to warp and/or weft.
Enter a sett for each yarn if you want thickness to show in draft.
©Judie Eatough 2005

15. Drafting with Weaving Software Program Version #’s
Fiberworks Bronze/Silver / ,
Patternland V6.07
pixeLoom , 3.1.1
ProWeave Release A
WeaveIt Basic/Pro
WeaveMaker
WeavePoint V 6.0
©Judie Eatough 2005