1. ACAT Transfers & Non-ACAT Transfers
Account Transfers
ACAT Transfers &
Non-ACAT Transfers

2. ACAT Transfers- Tidbits
ACAT stands for ‘Automated Client Account Transfer
True ACAT transfers are between two Clearing firms that subscribe to the ACAT system.
All Clearing firms have a DTC/Clearing /Broker Number that can be found at
Assets can not be liquidated during an ACAT transfer – they have to come over In-Kind.

3. ACAT Transfers STEP 1 Provide the receiving account number
Provide the SSN/TIN of all account owners
Provide the two letter abbreviation for the account registration
STEP 2
Provide the Clearing firm’s DTC number
Provide the delivering account number
Provide the delivering firm’s name
Provide the client’s name as it appears on the statement
STEP 3
For full transfers mark under Account Transfer – Full, Transfer All Assets In Kind
For partial transfers, mark under Account Transfer – Partial.

4. ACAT Transfers (continued)
STEP 4
Full Transfers:
For full transfers, this section will be left blank.
Partial Transfers
Give the quantity to be transferred – use “all” if you are bringing over the entire holding
Give the name of the holding
Give the Symbol or CUSIP
Give the account number
Mark ‘Transfer in Kind’
Mark the choice for dividends and capital gains
Give the estimated value of the holding
STEP 5
This section will be completed by Pershing
STEP 6 (Picture of Page 3 not shown)
All account owners should sign and date the form.
Give name and phone number of registered rep.
PLEASE NOTE:
Signature Guarantee is not needed
Be sure account number is written on every page.

5. ACAT Transfers – Initiating transfers in NetX360
FULL ACAT
Go to Service & Operations> Asset Movement>Account Transfers>Incoming Transfer Full
Enter the Pershing (Receiving) account number
Enter the delivering account number
Enter the clearing firm number
Click “Continue”
Review information.
Answer question about registrations matching
Click “Review Before Sending”
Review information
Click ‘Send Request’
Acknowledge the Account/Request Level Rule Violations with a comment such as ‘OK’.
Click “Send”
Then fax a copy of the Account Transfer form and statement to Pershing at Or the paperwork can be uploaded into NetX360. Use ‘Transfer form’ as the Document Type.
PARTIAL ACAT
Go to Service & Operations> Asset Movement>Account Transfers>Incoming Transfer Partial
Enter the Pershing (Receiving) account number
Enter the delivering account number
Enter the clearing firm number
Click “Continue”
Review information.
Answer question about registrations matching
List positions that are to be transferred
Click “Review Before Sending”
Review information
Click ‘Send Request’
Acknowledge the message about faxing the paperwork with a comment such as ‘OK’
Click “Send”
Then fax a copy of the Account Transfer form and statement to Pershing at Or the paperwork can be uploaded into NetX360. Use ‘Transfer form’ as the Document Type.

6. DTC Numbers (Also known as Clearing or Broker Numbers)
NSCC – National Securities Clearing Corporation -provides Automated Customer Account Transfer Service (ACATS)
Each subscribing firm is assigned a DTC number
A list of all DTC number can be found at
If you can’t find a DTC number for the delivering firm, call the firm and ask what it is.

7. Mutual Fund Transfers - Tidbits
Mutual Funds can be liquidated during the transfer process.
Mutual Fund Companies will not have a Clearing Number.
PO Boxes can not be used for the Delivering Firm’s address – Pershing overnights the paperwork to them.
The symbol or CUSIP must be given for each holding
Do not use the fund number as part of the fund account number. The fund number is generally separated from the account number by a hyphen.
Multiple accounts for the same fund family can be listed on the same Account Transfer form.
Follow the instructions given in NetX360 for what to do with the paperwork.

8. IN-KIND Mutual Fund Transfers
STEP 1
Provide the receiving account number
Provide the SSN/TIN of all account owners
Provide the two letter abbreviation for the account registration
STEP 2
Provide the delivering firm’s account number
Provide the delivering firm’s name
Provide the client’s name as it appears on the statement
Provide the delivering firm’s full overnight address PO Boxes can not be used!
STEP 3
Mark ‘Direct Mutual Fund’

9. IN-KIND Mutual Fund transfers (cont)
STEP 4 – All fields are required!
Give the quantity to be transferred – use all if you are bringing over the entire holding
Give the mutual fund name
Give the Symbol or CUSIP for the mutual fund
Give the fund account number – do not include the fund number
Mark ‘Transfer in Kind’
Mark the choice for dividends and capital gains
Give the estimated value of the holding
STEP 5
This section will be completed by Pershing
STEP 6
All account owners should sign and date the form
Give the name and phone number of the registered rep
PLEASE NOTE:
Signature Guarantee is not needed
Be sure the account number is on every page

10. LIQUIDATION Mutual Fund Transfers
STEP 1
Provide the receiving account number
Provide the SSN/TIN of all account owners
Provide the two letter abbreviation for the account registration
STEP 2
Provide the delivering firm’s account number
Provide the delivering firm’s name
Provide the client’s name as it appears on the statement
Provide the delivering firm’s full overnight address PO Boxes can not be used!
STEP 3
For FULL transfer- mark FULL, then one of the two choices for liquidation.
For PARTIAL transfer - mark PARTIAL.

11. Liquidation MF Transfers (cont)
STEP 4 – All Fields are Required!
Give the quantity to be transferred – use all if you are bringing over the entire holding
Give the mutual fund name
Give the Symbol or CUSIP for the mutual fund
Give the fund account number – do not include the fund number
Mark ‘Liquidate’
Mark the choice for dividends and capital gains
Give the estimated value of the holding
Section V
This section will be completed by Pershing
Section VI
All account owners should sign & date the form
Enter the registered rep name & phone number
PLEASE NOTE
Signature Guarantee is not needed
Be sure the account number is on every page

12. Mutual Funds – Initiating transfers in NetX360
In Kind Transfers
Go to Service & Operations>Asset Movement> Account Transfers> Incoming Account Transfer Partial
Enter the Pershing (Receiving) Account number
Enter the Delivering account number
DO NOT TAB – use curser to move to next field!
Change ‘Delivering Broker Type’ to “Direct Mutual Fund Company”
Click “Continue”
List all of the holdings (Quantity, Symbol & Account Number) The questions about being BD of record should be ‘NO’.
Click “Next Step”
Add instructions for Dividends and Capital Gains (no response defaults to ‘reinvest’)
Click “Review Before Sending”
Verify information.
Click “Send Request”
Acknowledge the Account/Request Level Rule Violations with a comment such as ‘OK’.
Click “Acknowledge & Send Request
Follow the instructions given in the Rule Violations for processing the transfer paperwork.
Liquidation Transfers
Go to Service & Operations>Asset Movement> Account Transfers> Incoming Account Transfer Full
Enter the Pershing (Receiving) Account number
Enter the delivering account number
Enter the Broker Name
Click “Continue”
Choose the mailing address for the delivering firm
Click “Select”
Verify information – Transfer type should be ‘Regular’
Click “Next Step”
List all of the holdings (Quantity, Symbol & Value). Click the Liquidate button’.
Click “Review Before Sending”
Verify information.
Click “Send Request”
Acknowledge the Account/Request Level Rule Violations with a comment such as ‘OK’.
Click “Acknowledge & Send Request
Follow the instructions given in the Rule Violations for processing the transfer paperwork.

13. Annuity Company Transfers - Tidbits
Annuities must be liquidated.
PO Boxes can not be used for the Delivering Firm’s address – Pershing overnights the paperwork to them.
Annuity Companies will not have a Clearing Number
Follow the instructions given in NetX360 for processing the transfer paperwork.

14. Annuity Company Transfers
STEP 1
Provide the receiving account number
Provide the SSN/TIN of all account owners
Provide the two letter abbreviation for the account registration
STEP 2
Provide the delivering firm’s account number
Provide the delivering firm’s name
Provide the client’s name as it appears on the statement
Provide the delivering firm’s full overnight address PO Boxes can not be used!
STEP 3
For FULL transfer- mark FULL, then LIQUIDATE ASSETS LISTED IN SECTION IV.
For PARTIAL transfer - mark PARTIAL.

15. Annuity Company Transfers (cont)
STEP 4
If you are liquidating the entire annuity, write all in the first column.
If you are liquidating only a portion of the annuity write the exact amount in the first column.
If you only want the Surrender free portion of the annuity to be liquidated, write ‘Surrender Free amount’.
Write ‘Annuity’ for the description.
No CUSIP or Symbol will be needed.
Give the contract number.
Mark ‘Liquidate’.
Give the Estimated Value in the last column.
STEP 5
This section will be completed by Pershing.
STEP 6
All account owners should sign and date the form
Enter the registered rep’s name and phone number
PLEASE NOTE:
A Signature Guarantee is not needed.
Be sure the account number is on every page

16. Annuity Transfers – Initiating transfers in NetX360
Go to Service & Operations>Asset Movement> Account Transfers> Incoming Account Transfer Full or Partial (whichever applies)
Enter the Pershing (Receiving) Account number
Enter the delivering account number
Enter the Broker Name
Click “Continue”
Choose the mailing address for the delivering firm
Click “Select”
Verify information – Transfer type should be ‘Regular’
Click “Next Step”
Give expected dollar amount in ‘Cash and Cash Equivalent; field. If it’s a full transfer, check the ‘All’ box. Leave everything else blank.
Click “Review Before Sending”
Verify information.
Click “Send Request”
Acknowledge the Account/Request Level Rule Violations with a comment such as ‘OK’.
Click “Acknowledge & Send Request
Follow the instructions given in the Rule Violations for processing the transfer paperwork.

17. DRS Transfers - Tidbits
DRS Transfers (Direct Registration System) involve holdings that are held directly at a Transfer Agent.
An address for the transfer agent should be given, however the paperwork is not mailed anywhere. It is faxed to Pershing.
Only DRS shares can be transferred. Shares held in ‘certificate’ form, can be deposited into the account by submitting the actual certificate.
Transfer Agents do not have a clearing number.
Only full shares can be transferred. If closing the delivering account, any fractional shares will be liquidated and a check sent to the client.
Only one holding can be transferred per form. For multiple holdings a new form is needed for each one.
Liquidations can not be done on a DRS Transfer.

18. DRS Transfers STEP 1 Provide the receiving account number
Provide the SSN/TIN of all account owners
Provide the two letter abbreviation for the account registration
STEP 2
Provide the delivering firm’s account number
Provide the delivering firm’s name
Provide the client’s name as it appears on the statement
Provide the delivering firm’s full overnight address PO Boxes can not be used!
STEP 3
Mark DRS/DRIP for Full or Partial Transfer.
If you are closing the delivering account, mark ‘Sell Fraction and close account.
If you only want the full shares to transfer, leaving the fractional shares behind, mark ‘Transfer full shares only’

19. DRS Transfers (continued)
STEP 4
Full Transfers:
For full transfers, this section will be left blank.
Partial Transfers
Give the quantity to be transferred – use all if you are bringing over the entire holding
Give the name of the holding
Give the Symbol or CUSIP
Give the account number
Mark ‘Transfer in Kind’
Mark the choice for capital gains
Give the estimated value of the holding
STEP 5
This section will be completed by Pershing.
STEP 6
All account owners should sign and date the form
Enter the registered rep’s name and phone number
PLEASE NOTE:
A Signature Guarantee is not needed.
Be sure the account number is on every page

20. DRS Transfers – Initiating transfers in NetX360
Go to Service & Operations>Asset Movement> Account Transfers> Incoming Account Transfer Full or Partial (whichever applies)
Enter the Pershing (Receiving) Account number
Enter the delivering account number
Enter the Broker Name
Click “Continue”
Choose the mailing address for the delivering firm- be sure it reads ‘Transfer Agent’ in the last column.
Click “Select”
Verify information
Change Transfer type to ‘DRS Eligible Transfer’
Click “Next Step”
Choose one of the choices in the drop down for the quantity of the transfer.
Fill in the Symbol or CUSIP for the position
Click “Review Before Sending”
Verify information.
Click “Send Request”
Acknowledge the Account/Request Level Rule Violations with a comment such as ‘OK’.
Click “Acknowledge & Send Request
Then fax a copy of the Account Transfer form and the statement to Pershing at Or the paperwork can be uploaded into Netx360. Index it as ‘Transfer Form’.