1. FIBER OPTIC VIDEO + DATA RT/COT
PRODUCT SPECIFICATION
EL – RVD1402 RT / COT
VIDEO
DATA 1 1 1
FCC
DESCRIPTION
This product can transmit image and control data between camera monitor or control keyboard and receiver box through 1core optical
cable, capable of composing such various networks as Point To Point, Linear Add/Drop and Ring. It can make long-distance
transmission with no relay and does not receive influence from electric or magnetic field by using optical characteristic.
The user can check the data transmission and receiving visually through the input and output display LED. For the multi-channel
equipment, image signal input and output voltage and the optical cable cut can be checked through 7Segment LED on the front panel.
FEATURES
-. High quality Image and Data transmission
-. 10 bit Digital link
-. RS-232C, RS-422, RS-485 Support
-. Long-distance transmission with no-relay using the optical
characteristics of optical communications (S/M : Maximum
Transmission Distance 190Km)
-. Image Signal Level Display & Built-in Optical Cable Cut Display
Function
-. Multiple Use of AC 110V / 220V
-. Built-in 7Segment LED to display image input and output
voltage display per channel (supporting NTSC, PAL, SECAM )
-. ECP Performance Certification, FCC, K Mark, Venture Business, INNOBIZ, GS, CE Certification
-. Supporting Point to Point, Linear Add/Drop and Ring
-. Supporting maximum 8 RT per 1 COT
NMS ( option )
. Management Function
-. Image Signal Number Value Display Function
-. Optical Cable Cut Alarm Function
-. Optical Equipment Abnormality Alarm Function
-. Optical Equipment History Management Function
APPLICATION
.CCTV, ITV and traffic control System
.CATV System
.Security System
.Process control and monitoring System
ORDERING INFORMATION
PART
NUMBER
DESCRIPTION
MAX
DISTANCE
(Option)
OPTICAL
PWR BUDGET
EL - RVD1202 RT / COT Ring V+D Transmitter
EL - RVD1202 RT / COT Ring V+D Receiver
8dB
20Km
SINGLE-MODE
9/125um
EL RVD1402 RT / COT Ring V+D Transmitter
EL - RVD1402 RT / COT Ring V+D Receiver
16dB
40Km

2. FIBER OPTIC VIDEO+DATA RT/COT
EL – RVD1402 RT / COT
SPECIFICATIONS
CONNECTORS
Video: BNC (Gold Plated Center-Pin)
Data: Terminal Block with Screw Clamps,
Type DB-9 Connector (RJ-45)
Optical: ST or SC Connector
ELECTRICAL & MECHANICAL
Power: A
Surface Mount: From Rack
Number of Rack Slots:
Current Protection: Automatic Resettable Solid-State
Current limiters
Size( WxHxD )
1u Rack Mount x 44 x 330mm
6u Rack Mount x 264 x 275mm
ENVIRONMENTAL
MTBF: > 100,000 hours
Operating Temp: ℃ to +74℃
Storage Temp: ℃ to +85℃
Relative Humidity: % to 95% (non-condensing)
VIDEO
Video Input: volt pk-pk ( 75 ohms )
Video Bandwidth: Hz –6.5 MHz
Differential Gain: <1%
Differential Phase: <1˚
Tilt: <1%
Signal-to-Noise Rate: >63dB
DATA
Data Interface: RS-232,RS-422, RS-485
with Tri-State
Data Format: NRZ,RZI,Manchester, Bi-phase
Data Rate: DC – 2Mbps(NRZ)
Bit Error Ratio: < 1 in 10 E-9
Operating Mode: Simplex or Full-Duplex
WAVELENGTH /1550nm
OPTICAL EMITTER Laser Diode
NUMBER OF FIBER 1Core
LED INDICATORS
-. Video Transmitter/ Data Transceiver
.Video input level display (7 segment)
.RX, TX Data LED
.Power LED
-.Video Receiver/ Data Transceiver
. Video output level display (7 segment)
.Fiber optic cable status alarm

3. FIBER OPTIC VIDEO+DATA RT/COT
EL – RVD1402 RT / COT
☞ 환형 망 구성 ( Ring )
West
East
COT
RT #
xch Video + xch Data
☞ Management system (N.M.S)
. Graphical User Interface is used Network Management
. Data Communication Status Display Function
. Optical Cable Cut Alarm Function
. Optical Equipment Abnormality Alarm Function
. Optical Equipment History Management Function
. Version Management of Equipment
. Install Location Display Function of Equipment
. Easy Install of System
3F, A-dong, 50, ELIM Building, sanupro 155beongil, Gwonseon-Gu, Suwon-si, Gyeonggi-Do, Korea(Goseck-dong, sanup 3dangi)
ELIM Co., Ltd
Tel : Fax :