1. Neurologic and Musculoskeletal Imaging Studies
دکترامیر هوشنگ واحدی
متخصص طب فیزیکی و توانبخشی
قسمت 3

3. Sacroiliac joint imaging
Anteroposterior angled and bilateral oblique views of the sacroiliac joints are the standard initial work-up.
sacroiliac joint CT is higher sensitivity for
subtle erosive changes
detection of subtle sclerosis.

5. In the trauma setting, plain radiography is the initial imaging study.
CT can be considered in the setting of more complex acetabular and pelvic fractures to aid in surgical pIanning. CT is the preferred modality for assessment of osseous-based abnormalities of the hip
MRI is the preferred modality, following plain radiography, to image AVN, marrow replacement processes, musculoskeletal tumors, and osteomyelitis.
Magnetic resonance arthrography has a much higher accuracy than nonenhanced MRI in the detection and staging of acetabular labral lesions

8. The neck-shaft angle
the collum-center-diaphysis or CCD angle is an important angle in the femoral neck.

9. Gage sign
represents an area of lysis in the lateral epiphyseal margin and the adjoining metaphysis. this sign is indicative of a lateral deformation of the femoral head.

10. Knees
AP, lateral , both obliques
Patella
Lateral and tangential (sunrise) views
AP standing, AP standing with flexion, lateral, and patellar views
Additional techniques
Notch views
Stress views (varus, valgus, AP)

11. In the trauma setting, the minimum initial examination includes
anteroposterior and
lateral views.
If there is a high clinical suspicion of fracture or lipohemarthrosis, then further views, such as bilateral oblique, sunrise, and/or tunnel notch, should be considered.
Bone bruise or
occult stress fracture are best shown with MRl.

13. The position of the patella is generally measured using the method described by Insall and Salvati , the ratio of the longest diagonal of the patella to the length of the patellar tendon should he between 0.8 and 1.2 .

14. The trochlear angle, the angle between the femoral condyles with its apex at the deepest point of the rochlear groove, is normally approximately 138°

15. AP, varus, valgus stress views Ligament injuries
Ankle &foot
Ankle: anteroposterior (AP), lateral, mortise view
Foot: standing AP, standing lateral, oblique
AP, varus, valgus stress views Ligament injuries

16. A three-view plain radiography in patients with suspected ankle injury that includes
anteroposterior,
lateral,
and mortise views .
Fluoroscopy with stress views can be necessary to assess for Lisfranc fracture dislocations.
CT with reformations is often useful for preoperative planning in patients with complex comminuted fractures of the foot and ankle, and can alter clinical management.
chronic ankle pain, the ACR appropriateness criteria list plain radiographs as the initial imaging study, with magnetic resonance second for several.

19. Bones of the tarsals 7 tarsals 1- Talus 1- Calcaneus 1- Navicular 1- Cuboid 3- Cuneiforms

20. Interphalangeal angle
This angle is used to evaluate interphalangeal hallux valgus.The longitudinal axes of the proximal and distal phalanx form an angle that should normally be less than 50.

21. Metatarsophalangeal angle
Also referred to as the hallux valgus angle. The angle is formed by the longitudinal axes of the first metatarsal and the proximal phalanx of the first digit. Anangle of 150is regarded as normal; angles exceeding 150indicate a hallux valgus deformity.

22. The Philip-Fowler angle
This angle is formed by the inferior calcaneus tangent and the tangent to the posterosuperior aspect of the tubercle of the calcaneus. Normal values for this angle range between 44° and 69°. An angle exceeding 75° is a sign of prominence of the tubercle of the calcaneus. Such a configuration is frequently associated with Achilles tendinitis or bursitis