1. Lockheed Martin Additive Manufacturing
Introduction to Engineering Design
EDGSN 100 Section 002
Joint City/Design Team 1
Mathias Haegele, webpage,
James Lauer, webpage,
Liam Raehsler, webpage,
Meghan Williams, web page,
Presented to: Prof. Berezniak
Date: 04/29/16

2. Purpose
To explain the thoughts that went into our USB Hub Mounting bracket design with accompanying visuals
Use this slide to create a new slide—use this template slide if you would prefer to have a Penn State blue background for your slides. 2

3. Background
- to design a new mounting bracket using additive manufacturing that can hold a 7-port USB hub vertically and hold the necessary cables in place under excessive vibrations
Use this slide to create a new slide—use this template slide if you would prefer to have a Penn State blue background for your slides. 3

4. Sponsor – Lockheed Martin
Use this slide to create a new slide—use this template slide if you would prefer to have a Penn State blue background for your slides. 4

5. Project Description -hold 7-port hub -mount vertically
-have a new cable retention bar
-survive excessive vibrations
Use this slide to create a new slide—use this template slide if you would prefer to have a Penn State blue background for your slides. 5

6. -Collaborated ideas in order to minimize the part count
Procedures (1 of 2)
-Collaborated ideas in order to minimize the part count
-Drafted the ideas on paper to help iron out kinks
Use this slide to create a new slide—use this template slide if you would prefer to have a Penn State blue background for your slides. 6

7. Procedures (2 of 2) Used Solidworks to create actual parts
- Used Makerbot software to push ideas towards assembly
Use this slide to create a new slide—use this template slide if you would prefer to have a Penn State blue background for your slides. 7

8. Results and Discussion
-Total parts: 2715
-Hook locking mechanism proved super effective
-Tracks necessary for hook system
Use this slide to create a new slide—use this template slide if you would prefer to have a Penn State blue background for your slides. 8

9. Conclusions and Recommendations
✔ hold 7-port hub
✔ mounts vertically and horizontally
✔ have a new cable retention bar
✔ survive excessive vibrations
✔ reduces part count
✔ aesthetically pleasing
Use this slide to create a new slide—use this template slide if you would prefer to have a Penn State blue background for your slides. 9

10. Closing
Use this slide to create a new slide—use this template slide if you would prefer to have a Penn State blue background for your slides. 10