1. MATERIAL SCIENCE HONORS
Introduction to
METALS

4. World Stability
Stock Market

5. Atomic Structure
Lithium.

6. Metallic Bonding
“Sea of Electrons”

7. Properties of Metals
Metals are strong.

8. Metals have a lustrous look when polished.
Properties of Metals
Metals have a lustrous look when polished.

9. Properties of Metals
Metals are flexible.

10. Properties of Metals
Metals are malleable.

11. Lab: Creep

12. Metals expand when heated.
Properties of Metals
Metals expand when heated.

13. Thermal Expansion

14. Metals have a very high conductivity rate of heat and electricity.
Properties of Metals
Metals have a very high conductivity rate of heat and electricity.

15. Commercial Applications
Copper
Aluminum
Cast Iron
Copper pot, cast iron skillet, aluminum pots & stainless steel.
Steel
Cookware

16. Medical Applications
Ohio University scientists Hugh Richardson and Sasha Govorov.
Using laser light, Ohio University scientists uses gold nanoparticles to kill cancer tumors.

17. Medical Applications
When stimulated with the right frequency of laser light, a small collection of metal nanoparticles, such as gold, can heat an area up to 1,000 times its size, according to Ohio University scientists Hugh Richardson and Sasha Govorov.
Metal nanoparticles, such as gold, can heat an area up to 1,000 times its size.

18. Medical Applications
Partial view of a gold nanosphere (shown), magnified by a factor of one billion, as seen through an electron microscope. The darker ring shows the "wall" of the nanosphere, while the lighter area to the right of the ring shows the interior region of the shell. The hollow particles can be made in sizes ranging from 20 to 70 nanometers in diameter, which is an ideal range for biological applications that require particles to be incorporated into living cells. researchers attached a short peptide to the nanospheres that enabled the particles to bind to tumor cells. After injecting the nanospheres into mice with melanoma, the researchers irradiated the animals' tumors with near-infrared light from a laser, heating the gold nanospheres and selectively killing the cancer cells to which the particles were bound.
A short peptide is attached to the nanospheres of gold that enabled them to bind to tumor cells.

19. Medical Applications
Partial view of a gold nanosphere (shown), magnified by a factor of one billion, as seen through an electron microscope. The darker ring shows the "
Using a near-infrared light from a laser, heat the gold nanospheres and selectively kill the cancer cells to which the particles were bound.

20. Electrical Applications

21. Certain metals can be magnetic.
Properties of Metals
Certain metals can be magnetic.

22. Non-Magnetic Metals

23. Magnetic Metals

24. Metals are crystalline in structure.
Properties of Metals
Metals are crystalline in structure.

25. Crystal Structures of Metals
Aluminum FCC
Cadmium HCP
Chromium BCC
Cobalt HCP
Copper FCC
Gold FCC
Iron BCC
Lead FCC
Magnesium HCP
Nickel FCC
Niobium BCC
Platinum FCC
Polonium Cubic
Silver FCC
Titanium HCP
Vanadium BCC
Zinc HCP
Zirconium HCP

26. Disadvantages of Metals
Metals corrode!

27. Unit #4: Corrosion
Process & Prevention

28. An alloy is a metal composed of more than one element.
Unit #3: Alloys
An alloy is a metal composed of more than one element.

29. Examples of Alloys Steel Bronze Brass
Bronze is the traditional name for a broad range of alloys of copper. It is usually copper with tin as the main additive.
Brass is an alloy of copper and zinc, a solid-solid solution. Typically it is more than 50 % copper.
Steel.
Brass

30. Mechanical Performance
Desirable Properties
Mechanical Performance
Corrosion Prevention

31. Unit #2: Metal Processing

32. Altering the shape or size of a metal by plastic deformation.
Cold Working
Altering the shape or size of a metal by plastic deformation.

33. Types of Cold-Working
Drawing
Rolling
Pressing

34. Hot Working
Hot working refers to plastic deformation carried out above the recrystallization temperature.

35. Annealing
Annealing is the process by which the distorted cold worked lattice structure is changed back to one which is strain free through the application of heat. This process is carried out entirely in the solid state and is usually followed by slow cooling in the furnace from the desired temperature.

36. Quenching
To harden by quenching, a metal (usually steel or cast iron) must be heated into the austenitic crystal phase and then quickly cooled.

37. Tempering
Tempering in a multi-step process. First it is heated to create a solid solution of iron and carbon in a process called "austenizing". Austenizing is followed by quenching to produce a martensitic microstructure. The steel is then tempered by heating it in the range of degrees Celsius. The steel is held at that temperature until the carbon trapped in the martensite diffuses to produce either bainite, or a mixture of ferrite and cementite.

38. Unit #1: History of Metals

39. Metallurgy is one of the oldest applied sciences.
The history of metals is closely linked to that of coins and gemstones.

40. Metallurgy
As early as 3400 B.C., at the beginning of the historical period, the Egyptians had an intimate knowledge of gold, copper ores and of processes of extracting metals.

41. Metals were also known to the Mesopotamians, Greeks and the Romans.
Metallurgy
Metals were also known to the Mesopotamians, Greeks and the Romans.

42. Native Metals
Copper
Gold
Mercury
Silver

43. Native Metals
Iron

44. Native iron is easily distinguishable because it contains 6-8% nickel.
Iron was available to the ancients in small amounts from meteors.
Shown here is an imperial coin of Emesa, in Syria with a conic 'Aerolith' being carried on a quadriga or four-horse chariot
Native iron is easily distinguishable because it contains 6-8% nickel.

45. The first metal to be used was copper.
Copper Age (~4000 B.C.)
The first metal to be used was copper.

46. The first tools, implements & weapons were made from copper.
Copper Age (~4000 B.C.)
The first tools, implements & weapons were made from copper.

47. Copper Age (~4000 B.C.)
The oldest known casting in existence, a pure copper frog, was cast in Mesopotamia.

48. Bronze was the first alloy used.
Bronze Age (~3000 B.C.)
Bronze was the first alloy used.
Bronze = Copper & 5-10% Tin

49. Bronze Age (~3000 B.C.)
New discoveries near Ban Chiang, Thailand, indicate that bronze technology was maybe known there as early as 4500 BC!

50. Iron smelting began in Egypt.
Iron Age (~2000 B.C.)
Iron smelting began in Egypt.

51. Process of Iron Smelting
A mixture of iron and oxide impurities is heated to about 1,500°C. Molten iron is drawn off on one side, and slag (waste) on the other.

52. Iron Age (~2000 B.C.)
Iron weapons revolutionized warfare and iron implements did the same for farming.

53. Iron Pillar ~ 400A.D.
This iron pillar dating to 400 A.D., remains standing today in Delhi, India. Corrosion to the pillar has been minimal a skill lost to current ironworkers.

54. Chinese were the first in the production of cast iron.

55. Molten iron is "cast" into forms made of sand.
Cast Iron (~800)
Molten iron is "cast" into forms made of sand.

56. Steel (~500)

57. Wood was needed as timber and it takes too much wood so smelt iron.
How To Smelt Iron?
Wood
Wood was needed as timber and it takes too much wood so smelt iron.

58. How To Smelt Iron?
Coal
Although cheap and plentiful, coal contained sulphur that made the iron too brittle to be of any use.

59. In 1709, Abraham Darby finally succeeded in smelting iron with coke.

60. Steel becomes the world’s most used material.
1750
Steel becomes the world’s most used material.

61. Steel Production Today
Step 1:
Fe2O3(s) + 3CO(g) = 2Fe(l) + 3CO2(g)

62. Steel Production Today
Step 2:
Molten iron is mixed with carbon & other elements.

63. Isolated Pure Aluminum
1850
Isolated Pure Aluminum
Charles Martin Hall, "American chemist, who discovered an inexpensive method for the isolation of pure aluminum from its compounds. The same electrolytic process was discovered concurrently by the French chemist Paul L.T. Heroult and is therefore known as the Hall-Heroult process. It became the basis for the aluminum industries both in the United States and in Europe.
Charles Martin Hall

64. 1900
Aircrafts move from fabric to high strength aluminum alloys.

65. Specialty Alloys ( )

66. Human Body Parts (1955-present)
High quality alloys of titanium & cobalt.

67. Super Alloys (1970-Present)
Since they can sustain high temperatures, super alloys were developed for jet engines.

68. Transparent Aluminum (2010)
A ceramic research lab in Dresden, Germany, has developed transparent Alumina by subjecting fine-grained aluminum to a whopping 1200 degrees Celsius ...the result of which is amazingly light but three times tougher than hardened steel of the same thickness, and it's see-through.
Fine grained aluminum is heated to 1200°C!
3X tougher than steel & it’s see-through!

69. Metamaterials (2015)
Materials designed that use light to manipulate its mechanical properties.

70. The top is a bilayer gold/silicon nitride membrane containing an array of cross-shaped nanoantennas etched into the gold layer. The bottom is a metal reflector that is separated from the gold/silicon nitride bilayer by a three-micron-wide air gap.

71. The device can potentially be used as a new frequency reference to accurately keep time in GPS, computers, wristwatches and other devices.

72. New Fuel Cell Catalyst (2016)

73. Haotian Wang and his Stanford colleagues developed a new way to fine-tune platinum catalysts in fuel cells and other clean-energy technologies.
A nanosize squeeze can significantly boost the performance of platinum catalysts that help generate energy in fuel cell.