1. Date of download: 10/17/2017
Copyright © ASME. All rights reserved.
From: MRI-Based Modeling for Radiocarpal Joint Mechanics: Validation Criteria and Results for Four Specimen-Specific Models
J Biomech Eng. 2011;133(10): doi: /
Figure Legend:
Isolation and suturing of the tendons and fixation of radius and ulna to PVC plate. The radius has two plastic bolts and ulna has one. The isolated and sutured extensor carpi radialis tendons are clearly seen at the bottom of the image.

2. Date of download: 10/17/2017
Copyright © ASME. All rights reserved.
From: MRI-Based Modeling for Radiocarpal Joint Mechanics: Validation Criteria and Results for Four Specimen-Specific Models
J Biomech Eng. 2011;133(10): doi: /
Figure Legend:
Illustration of the bone isolation process prior to image registration. The isolated radius bone (right) was derived from the initial MR image (left), as would also be the case for the scaphoid and lunate.

3. Date of download: 10/17/2017
Copyright © ASME. All rights reserved.
From: MRI-Based Modeling for Radiocarpal Joint Mechanics: Validation Criteria and Results for Four Specimen-Specific Models
J Biomech Eng. 2011;133(10): doi: /
Figure Legend:
Example comparison of pressure distribution from Pressurex film (a), (d), the Tekscan pressure sensor (b), (e), and the MRI-based models (c), (f) for Specimens 3 (a), (b), (c) and 4 (d), (e), (f). All images are oriented with dorsal at top, lunate fossa to the right, and scaphoid fossa to the left. Note the consistent dorsal contact measured by the Tekscan sensor and the MRI-based models.

4. Date of download: 10/17/2017
Copyright © ASME. All rights reserved.
From: MRI-Based Modeling for Radiocarpal Joint Mechanics: Validation Criteria and Results for Four Specimen-Specific Models
J Biomech Eng. 2011;133(10): doi: /
Figure Legend:
The sum of radiolunate and radioscaphoid joint contact forces across the wrist by specimen (S1–S4) for Pressurex film (Film), the Tekscan pressure sensor (Tek), and the MRI-based contact models (Model). The asterisks and braces indicate which model measurements met the validation criterion for total joint force and with respect to which experimental measures.

5. Date of download: 10/17/2017
Copyright © ASME. All rights reserved.
From: MRI-Based Modeling for Radiocarpal Joint Mechanics: Validation Criteria and Results for Four Specimen-Specific Models
J Biomech Eng. 2011;133(10): doi: /
Figure Legend:
Contact area for all measurement methods compared by specimen (S1–S4), and by articulation (RS = radioscaphoid, RL = radiolunate). Model data matches the direct measurements well in all cases, and the Tekscan contact area is also consistently similar (except for S1).