1. Adhesive
Suported by

2. Cement NOTE: Flammable material – use with care.
Makes a tacky, pliable bond using pressure-sensitive rubber contact cement
For use in bonding cork, leather, or rubber to metal
For use in working temperatures that do not exceed 225°F (107°C).
NOTE:
Flammable material – use with care.
Suported by

3. Depend No-Mix Adhesive
Bonds almost any substrate in minutes
Fast curing for handling strength in just two minutes
Features high peel and impact strength
Heat resistant to 250°F (121°C) and oil resistant
For use with wood, ceramic, glass, metal, cork, chrome, and many more substrates
Kit contains a 0.85 fl. oz. (25 ml) container of adhesive and a 1.20 fl.oz. (35 ml) container of activator.
Suported by

4. Fast Cure Epoxy Mixercups
High strength adhesive for general purpose bonding, sealing, and patching
Contains ten mixercups of pre-measured resin and hardener.
Suported by

5. Form-A-Gasket sealants
Fast-drying and hard setting; resists gasoline, kerosene, fuel and diesel oils, anti-freeze, alkalis, and steam. Withstands pressures to 5000 psi (34,475 kPa) and temperatures to 399°F (204°C)
Slow-drying, dries to a pliable film; seals T-joints and segmented gasket joints. Withstands pressures to 5000 psi (34,475 kPa) and temperatures to 399°F (204°C)
Thin and brushable for finely machined surfaces. Dries slowly, nonhardening, and resists most shop fluids.
Suported by

6. Thank You