1. CHEKING CALCULATION OF TURBOMACHINERY IN ANSYS
CHEKING CALCULATION OF TURBOMACHINERY IN ANSYS CFX USAGE OF MESH-GENERATOR ANSYS TURBOGRID and format-converter PROFILER special engineered at SSAU
Shabliy Leonid
Instructor of department Theory of Aircraft Engines
Samara State Aerospace University
SSAU Samara, Moskovskoe shosse 34, bild. 5, room 405
Ph.: (846) ;
Samara State Aerospace University

2. TURBOMACHINERY CALCULATION «FROM ZERO»
CHEKING CALCULATION OF
TURBOMACHINERY IN ANSYS
TURBOMACHINERY CALCULATION «FROM ZERO»
VISTA (CCD, CPD, etc.)
INITIAL PROJECTING
Base parameters of turbomachine: machine type, mass flow rate, pressure increase/decrease degree, desirable efficiency
Geometry parameters of turbomachine: Inlet/Outlet Diameters, height of blades, blade angles at Inlet/Outlet, etc.
BLADE MODELER
3D-PROFILING
Geometry of blade row: shroud contour, hub contour, blade sections
CFD-results Efficiency, mass flow rate pressure and temperature fields
Mesh Model HEX-mesh for Ansys CFX
TURBO GRID
MESH GENERATION
CFX
CFD-CALCULATION
Samara State Aerospace University

3. LET’S SEE CONVERTION PROCESS IN DETAILS
CHEKING CALCULATION OF
TURBOMACHINERY IN ANSYS
BUT IF YOU NEED CHECKING CALCULATION WITH EXISTING TURBOMACHINE GEOMETRY?
LET’S SEE CONVERTION PROCESS IN DETAILS
Existing Turbo-machine Geometry: drawing or 3D-model with description of hub/shroud curves and blade sections
SSAU PRODUCT ! ?
PROFILER
DATA CONVERTION
TURBO GRID
MESH GENERATION
CFD-results Efficiency, mass flow rate pressure and temperature fields
CFX
CFD-CALCULATION
Samara State Aerospace University

4. CHEKING CALCULATION OF TURBOMACHINERY IN ANSYS
VANE GEOMETRY DATA:
PROFILER
DATA CONVERTION
1. INPUTS IN PROFILER FROM DRAWING MANUALLY
2. LOADS FROM DIFFERENT COORDINATE FILES AUTOMATICALLY
Samara State Aerospace University

5. CHEKING CALCULATION OF TURBOMACHINERY IN ANSYS
VANE GEOMETRY DATA:
PROFILER
DATA CONVERTION
1. CHECKING VISUALLY
2. CORRECTING
3. ORIENTING IN ENGINE COORDINATE SYSTEM
4. SAVING IN TURBOGRID FORMAT
Samara State Aerospace University

6. CHEKING CALCULATION OF TURBOMACHINERY IN ANSYS
GEOMETRY LOADS IN TURBOGRID
TURBO GRID
MESH GENERATION
AND MESH FOR FLOW IS GENERATING
Samara State Aerospace University

7. CHEKING CALCULATION OF TURBOMACHINERY IN ANSYS
IN CFX-Turbomachinery
CFX
CFD-CALCULATION
MESH LOADS
AND MACHINE PARAMETERS SETS
Samara State Aerospace University

8. CHEKING CALCULATION OF TURBOMACHINERY IN ANSYS
IN CFX-POST ON PAGE “TURBO” POST-PROCESSING IS GOING
CFX
CFD-CALCULATION
Samara State Aerospace University

9.
Thank you!
CHEKING CALCULATION OF TURBOMACHINERY IN ANSYS CFX USAGE OF MESH-GENERATOR ANSYS TURBOGRID and format-converter PROFILER special engineered at SSAU
Shabliy Leonid
Instructor of department Theory of Aircraft Engines
Samara State Aerospace University
SSAU Samara, Moskovskoe shosse 34, bild. 5, room 405
Ph.: (846) ;
Samara State Aerospace University