1. Technology Building-Smart Class
Audio Visual Training

2. Smart Class Equipment Smart Class
LCD Projector/Built In Screen Control Panel
Credenza
(DVD/VCR & P.C. inside)

3. Smart Class
Turning on A/v System
Use the key provided to you by your department head to unlock the credenza.

4. *Make sure Master Switch is on inside the credenza.
Smart Class
Turning on A/v System
*Make sure Master Switch is on inside the credenza.
*Master Switch will light up red if it is in the ON position. Master Switch should never be turned off.

5. Smart Class
Turning on A/v System
Press the “ON” button located on the bottom right hand side of the control panel and the projector will begin turning on.

6. Smart Class
Turning on A/v System
Please note, if you’re touch pad is not working, there will be a remote inside the credenza. The green button on all remotes will turn on your projector.

7. Smart Class
Turning on A/v System
Press the “ON” button located in the center of the computer to turn it on.
Pull out mouse and keyboard from drawer above the P.C.
You’ll find the monitor built into the Credenza above the keyboard.

8. Or press button labeled “Input A” or “Input 1”.
Smart Class
Projecting a COmputer
To display the computer, press the “Input” button on the control panel until the projector reads “Input A” on the top corner of the screen.
*If using a remote, press “INPUT” button until you see “INPUT A” on the screen.
Or press button labeled “Input A” or “Input 1”.

9. Smart Class
Projecting a computer
To adjust the volume coming from your *computer press the “VOL +” and “VOL -” buttons on the control panel.
*Please note, volume must also be turned up on your P.C. to receive sound.

10. Smart Class
Projecting a DVD
To play a DVD or VHS open the compartment on the right hand side of the credenza and pull out the DVD/VCR combo player located inside.

11. Smart Class
Projecting a DVD
To play a DVD, turn on your DVD/VCR combo player by pressing the “Power” button on the bottom left hand corner of the player.

12. Smart Class
Projecting a DVD
Press the Eject button next to the DVD player to open it.
Place DVD in player with label up.
Push the Eject button again to close and load the DVD player.

13. Or press button labeled “VIDEO” or “Input 3”.
Smart Class
Projecting a DVD
Press the “DVD” button on the control panel to have projector display the DVD player.
If there is no “DVD” button press the “INPUT” button until the projector displays the word “VIDEO” on the top corner of the screen.
*If using a remote, press “INPUT” button until you see “VIDEO” on the screen.
Or press button labeled “VIDEO” or “Input 3”.

14. Projecting a DVD There are 3 ways to control your DVD:
Smart Class
Projecting a DVD
There are 3 ways to control your DVD:
Use control buttons located on the control panel.
2. Use control buttons located on the DVD player itself.
3.Use the remote control located in the compartment with the player.

15. Playing a DVD To adjust the volume coming from the DVD press the
Smart Class
Playing a DVD
To adjust the volume coming from the DVD press the
“VOL +” and “VOL -” buttons on the control panel.

16. Press the “Eject” button to retrieve your DVD.
Smart Class
Playing a DVD
To stop the DVD press the STOP button located on the bottom left hand corner of the DVD player.
Press the “Eject” button to retrieve your DVD.

17. Smart Class
Projecting a VHS
To play a VHS, turn on your DVD/VCR combo player by pressing the “Power” button on the bottom left hand corner of the player.

18. Put your VHS tape into the slot on the right hand side of the player.
Smart Class
Projecting a VHS
Put your VHS tape into the slot on the right hand side of the player.

19. Or press button labeled “VIDEO” or “Input 3”.
Smart Class
Projecting a VHS
Press the “VCR” button on the control panel to have projector display the VHS tape.
If there is no “VCR” button, press the “INPUT” button until the projector reads “VIDEO” on the top corner of the screen.
*If using a remote, press “INPUT” button until you see “VIDEO” on the screen.
Or press button labeled “VIDEO” or “Input 3”.

20. Projecting a VHS There are 3 ways to control your VHS:
Smart Class
Projecting a VHS
There are 3 ways to control your VHS:
Use control buttons located on control panel.
2. Use control buttons located on the VCR player itself
3.Use the remote control, located in the compartment with the DVD/VCR.

21. Projecting a VHS To adjust the volume coming from the VHS press the
Smart Class
Projecting a VHS
To adjust the volume coming from the VHS press the
“VOL +” and “VOL –” buttons on the control panel.

22. Press the “Eject” button to retrieve your VHS.
Smart Class
Projecting a VHS
To stop the VHS press the STOP button located on the bottom left hand corner of the VCR.
Press the “Eject” button to retrieve your VHS.

23. Turning oFF the A/v System
Smart Class
Turning oFF the A/v System
To turn off the A/V System press the “OFF” button located on the control panel twice.
*If using a remote, press green “Power” button twice, or press “Off” Button twice.

24. Turning oFF the A/v System
Smart Class
Turning oFF the A/v System
Turn off the P.C. and DVD /VCR player and you have completed shutting down the A/V system.
Please place back all items removed from the credenza.
(remotes, mouse/keyboard, etc.)

25. Smart Class
Turning OFF A/v System
Use the key provided to you by your department head to lock the credenza.

26. This presentation was created by Katherine Roba
Smart Class
Audio Visual Contact info
Office Phone: Ext
Office
Office Location: Technology Building Room 110
Office Website:
This presentation was created by Katherine Roba ~