1. Plaster Molds
Slab Unit

2. Objectives Understand the difference between a slump and a hump mold
Create a set of molds consisting of one slump and one hump mold
Be aware of different drying times!
Construct your molds with a unifying theme (utilize texture, appliqué, pattern, design, etc)

3. Samples for Inspiration

4. Texture

5. Interesting Shapes

6. Pattern

7. Added Details

8. Rough Edges

9. Common Theme, Different Shapes

10. Assessment (30 pts) Effort/Participation
(20 pts) Attitude, Conduct, and Cooperation
(10 pts) Thinking and Planning
(15 pts) Craftsmanship: Care taken with creating the projects, molds are dried at the proper time, no cracking is visible, slabs are rolled out in proper thickness and trimmed evenly
(10 pts) Project-Specific Criteria : one slump and one hump mold is used, common theme is evident in set
(5 pts) Experimentation/Creativity
(10 pts) Use of Tools/Clean-up and Storage