1. Staying in Compliance
Dispensing Equipment
Presented by
Harry Beals
Williams, Beck & Hess

2. Anchor bolts and dispenser frame solid and in good condition.

3. Emergency shutoff (impact valve) anchored.

4. Check for leaks in hydraulic area.
Discoloration

5. Dispenser Sump Clean and Dry

6. Electrical conduit, junction boxes, and wiring in good condition.

7. Hoses in good condition, no cuts, cracks, bulges, blisters, flat spots, kinks or worn spots.

8. Breakaways and swivels in good condition.

9. Check nozzles for good condition.

10. Filters clean, dry, and dated
Check length of time since last filter change.

11. If suction pump, check belts and clean strainer.
(strainer inside of pump housing)

12. Warnings and fueling instructions posted and readable.

13. Meter(s) calibrated within last 12 months.

15. Emergency Stop Switch easy to see and accessible. Test it!

16. Emergency stop switch tested and working properly.

17. Test electrical continuitity of hanging hardware.

18. FIBERGLASS SUMPS
CONDUITLESS ENTRY
EPOXY SEALED

19. PRODUCT HOSE SYSTEMS

20. Questions????