1. Date of download: 10/19/2017
Copyright © ASME. All rights reserved.
From: Finite Element Modeling of Cutting Force and Chip Formation During Thermally Assisted Machining of Ti6Al4V Alloy
J. Manuf. Sci. Eng. 2013;135(6): doi: /
Figure Legend:
Three layers of the workpiece

2. Date of download: 10/19/2017
Copyright © ASME. All rights reserved.
From: Finite Element Modeling of Cutting Force and Chip Formation During Thermally Assisted Machining of Ti6Al4V Alloy
J. Manuf. Sci. Eng. 2013;135(6): doi: /
Figure Legend:
Mesh of the model

3. Date of download: 10/19/2017
Copyright © ASME. All rights reserved.
From: Finite Element Modeling of Cutting Force and Chip Formation During Thermally Assisted Machining of Ti6Al4V Alloy
J. Manuf. Sci. Eng. 2013;135(6): doi: /
Figure Legend:
Original cutting force data predicted by the 2D turning model for different workpiece preheating temperatures

4. Date of download: 10/19/2017
Copyright © ASME. All rights reserved.
From: Finite Element Modeling of Cutting Force and Chip Formation During Thermally Assisted Machining of Ti6Al4V Alloy
J. Manuf. Sci. Eng. 2013;135(6): doi: /
Figure Legend:
Cutting force data comparison

5. Date of download: 10/19/2017
Copyright © ASME. All rights reserved.
From: Finite Element Modeling of Cutting Force and Chip Formation During Thermally Assisted Machining of Ti6Al4V Alloy
J. Manuf. Sci. Eng. 2013;135(6): doi: /
Figure Legend:
Shear stress and cutting force

6. Date of download: 10/19/2017
Copyright © ASME. All rights reserved.
From: Finite Element Modeling of Cutting Force and Chip Formation During Thermally Assisted Machining of Ti6Al4V Alloy
J. Manuf. Sci. Eng. 2013;135(6): doi: /
Figure Legend:
Shear stress in front of the cutting tool in the unit of Pa

7. Date of download: 10/19/2017
Copyright © ASME. All rights reserved.
From: Finite Element Modeling of Cutting Force and Chip Formation During Thermally Assisted Machining of Ti6Al4V Alloy
J. Manuf. Sci. Eng. 2013;135(6): doi: /
Figure Legend:
Comparison between simulated chip formation and experimental chip. The contour shown in the simulation results is the equivalent plastic strain.

8. Date of download: 10/19/2017
Copyright © ASME. All rights reserved.
From: Finite Element Modeling of Cutting Force and Chip Formation During Thermally Assisted Machining of Ti6Al4V Alloy
J. Manuf. Sci. Eng. 2013;135(6): doi: /
Figure Legend:
Chip measurement data comparison

9. Date of download: 10/19/2017
Copyright © ASME. All rights reserved.
From: Finite Element Modeling of Cutting Force and Chip Formation During Thermally Assisted Machining of Ti6Al4V Alloy
J. Manuf. Sci. Eng. 2013;135(6): doi: /
Figure Legend:
History of chip formation: (a) equivalent plastic strain distribution at 7.0 × 10−6 s of cut, (b) temperature distribution at 7.0 × 10−6 s of cut, (c) equivalent plastic strain distribution at 9.7 × 10−6 s of cut, (d) equivalent plastic strain distribution at 1.0 × 10−6 s of cut. Cutting trial 1 simulation.

10. Date of download: 10/19/2017
Copyright © ASME. All rights reserved.
From: Finite Element Modeling of Cutting Force and Chip Formation During Thermally Assisted Machining of Ti6Al4V Alloy
J. Manuf. Sci. Eng. 2013;135(6): doi: /
Figure Legend:
The evolution of multiple shear bands on chips, the contour is the distribution of equivalent plastic strain. States (a)–(f) correspond to the cutting forces (a)–(f) in Fig. 11.

11. Date of download: 10/19/2017
Copyright © ASME. All rights reserved.
From: Finite Element Modeling of Cutting Force and Chip Formation During Thermally Assisted Machining of Ti6Al4V Alloy
J. Manuf. Sci. Eng. 2013;135(6): doi: /
Figure Legend:
Detailed cyclic cutting forces, cutting forces (a)–(f) correspond to the states (a)–(f) in Fig. 10