1. Omnicrete A Presentation
Safe, Solid, Sensible, Green Construction Technology
A Presentation
Prepared By: L.Terry, Inventor / Patent Holder
Omnicrete International, Inc.

2. GREEN TECHNOLOGY for the Construction Industry

3. Contents Green Technology Benefits of Omnicrete
Cost Savings Comparison
L.E.E.D. Certification Comparison
Design Comparison
Building Envelope / Design Secrets
Flexibility in Design
Wall Samples / Finished Model
Residential Applications
Commercial Applications
L.E.E.D. Point Assessment
Conclusion
References

4. Green Technology?
Outpacing the construction industry with Green Technology, Omnicrete has developed and delivered the most energy efficient construction system ever . Our customers not only meet the compliance of todays L.E.E.D. and Green strategies but have saved significant money in energy, insurance premiums and maintenance costs along the journey.

5. Benefits of Omnicrete The Greenest Building System
Most Eco-Friendly Process
Most Energy Efficient Building System – Up To 75% Savings
Most Sustainable Materials and System
Highest L.E.E.D. Points without additional costs
Lowest Construction Cost when seeking L.E.E.D. Certifications
Lowest Maintenance Cost
Highest Carbon Tax Credit
Smallest Carbon Footprint
Highest Fire Rating on Exterior Walls – 8 Hours
Highest Fire Rating on Interior Walls – 4 Hours
Highest Sound Resistance
Healthiest Indoor Air Environment
Zero Off-Gassing
Zero VOC’s (Volatile Organic Compounds)
Multiple Chemical Sensitivity (MCS) Compliant
Only system with consultant specializing in MCS Compliancy
Moisture and Mold Proof
Termite and all wood destroying Insect Resistance / Proof
Wind Resistant up to 300+ Miles Per Hour

6. Cost Savings Comparison?
Conventional
Omnicrete
Construction Cost Energy Savings Maintenance Hazard Insurance Premiums
Up to 30% * Up to 70% Up to 50% Up to 60%
* When seeking Platinum L.E.E.D. Certification – See reference page

7. L.E.E.D. Certification Comparison
Conventional
Omnicrete
$ * Same
Hard Construction Costs Soft Certification Costs $
Same
* When seeking Platinum L.E.E.D. Certification. Actual costs of a project – See credits at end of slide show.

8. Design Comparison Omnicrete Conventional
Structural Capabilities Height Restrictions Span Restrictions Design Flexibility Ease of Construction Curved Walls Structural Columns
Unlimited
Limited
Problematic
Unlimited

9. Building Envelope Design Secrets
The three main components of this Tri-Wall Envelope is Autoclaved Aerated Concrete (AAC) on the outer and inner “stay-in-place” forming walls and the solid poured steel reinforced concrete center/inter core. The wall in this picture is ready to accept poured concrete
Design Secrets
High Energy Savings - two inner vapor barriers blocking moisture from entering the core and the insulated properties of the AAC.
Cost savings - ease of construction and the smooth but porous interior and exterior surfaces allowing no drywall or stucco scratch coats . Built in monolithically designed lintels above openings increases strength and lowers cost.
Mass – The total wall system is far stronger, more energy efficient, more wind resistant, more mold and moisture resistant, and more fire resistant than the sum of each material used in the completed system.

10. Flexibility in Design
Curved walls and beautiful architectural designs along with attention to details is the hallmark of this system. The design flexibility is virtually unlimited.

11. Wall Samples / Finished Model

12. Residential Applications
Omnicrete has not gained significant market traction in the residential construction market due to market down turn in the in the early stages of introduction, coupled with the simple fact that builders naturally lack incentive in offering Omnicrete to it’s clients since all of the benefits are realized by the client / occupant after the construction process is completed. Learning a new construction process builders have little, if any direct financial incentive to promote, is naturally void of common sense. Our largest market traction has been through “owner/builders” which have a motivation in seeking out the many benefits that extend far beyond the construction process.

13. Commercial Applications
Omnicrete has not gained market traction most likely because during the natural commercial construction process plans and specifications are completed before they are sent to the building community for bidding. Omnicrete therefore has not had a clear opportunity to “bid” on projects that have not been designed in the Omnicrete system; it’s just as simple as that. Much like the residential market, the focus has to be derived from the “user” or in developers who own the many benefits of the system, rather than through builders, whose focus is not on the user benefits.

14. Conclusion
Omnicrete is clearly a leader in construction Green Technology.
Benefits of Omnicrete are extensive and far exceed all other construction methods.
Cost savings are extensive especially seeking L.E.E.D Certification.
L.E.E.D. Certification Comparison is reflective of the system superiority.
Building envelope shows how the system achieves such performance.
Flexibility in Design creates a user friendly system without limitations.
Wall samples reflects design flexibility and unlimited possibilities.
Omnicrete is not as suitable for the Residential Market as it is for the Commercial Market; especially for the Hotelier and Resort Market.
The shell design yields 41 points towards the 48 needed for Platinum L.E.E.D. Certification which is far more than any other construction system.
Omnicrete is focusing it’s marketing efforts on the Hotelier and Resort Industry as well as other commercial applications because they will derive the greatest benefits from the system.

15. References
Northbridge Environmental Management Consultants Research done April 16th 2003.
Omnicrete.com