1. INDENTIFYING BODY PANEL/KOMPONEN TO BE REPAIRED
REPAIRING BODY PANELS
INDENTIFYING BODY PANEL/KOMPONEN TO BE REPAIRED
BODY OTOMOTIF (F-022)
SK – KD 03

2. TARGET OF LEARNING ACTIVITY
Educative participant can mention the Parts of Panel Vehicle.
Educative participant can mention components in panel of body vehicle.
Educative participant comprehend function of panel Vehicle
Teknologi dan Rekayasa

3. 1. External Construction 2. Internal Construction
KONSTRUKSI BODI KENDARAAN
1. External Construction
4. Engine Hood 7.
Roof 9.
Doors
2. Internal Construction 5.
Fender 8.
Behind bodi
10.
Deck Lid 3.
Floor
6. Cowl and Dash Panel
Quarter Panel
11.
Teknologi dan Rekayasa

4. EXTERNAL CONSTRUCTION
This area consist of some linked up panels with some extension type and earn seen directly from outside
Teknologi dan Rekayasa

5. EXTERNAL CONSTRUCTION
Teknologi dan Rekayasa

6. INTERNAL CONSTRUCTION
This area consist of existing components in vehicle bodi, panels to be used to strengthen vehicle body
Teknologi dan Rekayasa

7. INTERNAL CONSTRUCTION
Teknologi dan Rekayasa

8. FLOOR
Floor usually consist of some small component which welded together to become one unit. At composite type usually flatten and separate with chassis, while integral type make rigid with chassis and usually scraggly
Teknologi dan Rekayasa

9. FLOOR
Teknologi dan Rekayasa

10. ENGINE HOOD Engine hood is part of vehicle body which covered engine
Teknologi dan Rekayasa

11. ENGINE HOOD
Teknologi dan Rekayasa

12. TIPE ENGINE HOOD Teknologi dan Rekayasa 1
Union type, while engine hood installation straitened by bolt 2
Piano type, engine hood installation use hasp by the side of and middle 3
One-piece type, engine hood hasp put front and behind
Teknologi dan Rekayasa

13. TYPE OF ENGINE HOOD INSTALATION
REAR OPENING TYPE
FRONT OPENING TYPE
Teknologi dan Rekayasa

14. FENDER
Fender or wing is vehicle component which closing over wheels. In general fender divided to become 2 kinds of, front Fender and behind fender
Teknologi dan Rekayasa

15. FENDER
Teknologi dan Rekayasa

16. COWL AND DASH PANEL
Cowl is a panel in front of vehicle as separate between engine and cabin usually make from union some small panel
Teknologi dan Rekayasa

17. COWL AND DASH PANEL
Teknologi dan Rekayasa

18. ROOF
Most of roof have lasing from regular traverse flimsy plate. This lasing usually linked up by welded and represent shares for hold strands for the installation of roof head lining
Teknologi dan Rekayasa

19. ROOF
Teknologi dan Rekayasa

20. QUARTER PANEL
This component usually union with wing behind, and have external and internal construction. External construction bend and linked up with internal construction with bolt and weld
Teknologi dan Rekayasa

21. MIDDLE PILLAR
Middle pillar represent prop up of middle shares and from other side roof. therefore, this construction shall strength. middle pillar also have function as seat door hasp
Teknologi dan Rekayasa

22. PINTU-PINTU
Teknologi dan Rekayasa

23. DECK LID
Deck lid is door component as way out enter located goods behind vehicle. This component also consist 2 especial panel, that is external and internal panel
Teknologi dan Rekayasa

24. DECK LID
Teknologi dan Rekayasa