Download presentation
Presentation is loading. Please wait.
1
Bipolar Junction Transistors (BJTs)
C H A P T E R 6 Bipolar Junction Transistors (BJTs)
2
Figure 6.1 A simplified structure of the npn transistor.
Microelectronic Circuits, Sixth Edition Sedra/Smith Copyright © 2010 by Oxford University Press, Inc.
3
Figure 6.2 A simplified structure of the pnp transistor.
Microelectronic Circuits, Sixth Edition Sedra/Smith Copyright © 2010 by Oxford University Press, Inc.
4
Figure 6.3 Current flow in an npn transistor biased to operate in the active mode. (Reverse current components due to drift of thermally generated minority carriers are not shown.) Microelectronic Circuits, Sixth Edition Sedra/Smith Copyright © 2010 by Oxford University Press, Inc.
5
Microelectronic Circuits, Sixth Edition
Sedra/Smith Copyright © 2010 by Oxford University Press, Inc.
6
Figure 6.9 Modeling the operation of an npn transistor in saturation by augmenting the model of Fig. 6.5(c) with a forward conducting diode DC. Note that the current through DC increases iB and reduces iC. Microelectronic Circuits, Sixth Edition Sedra/Smith Copyright © 2010 by Oxford University Press, Inc.
7
Figure 6.10 Current flow in a pnp transistor biased to operate in the active mode.
Microelectronic Circuits, Sixth Edition Sedra/Smith Copyright © 2010 by Oxford University Press, Inc.
8
Figure 6.12 Circuit symbols for BJTs.
Microelectronic Circuits, Sixth Edition Sedra/Smith Copyright © 2010 by Oxford University Press, Inc.
9
Figure 6.13 Voltage polarities and current flow in transistors biased in the active mode.
Microelectronic Circuits, Sixth Edition Sedra/Smith Copyright © 2010 by Oxford University Press, Inc.
10
Microelectronic Circuits, Sixth Edition
Sedra/Smith Copyright © 2010 by Oxford University Press, Inc.
11
Microelectronic Circuits, Sixth Edition
Sedra/Smith Copyright © 2010 by Oxford University Press, Inc.
12
Figure 6.18 Large-signal equivalent-circuit models of an npn BJT operating in the active mode in the common-emitter configuration with the output resistance ro included. Microelectronic Circuits, Sixth Edition Sedra/Smith Copyright © 2010 by Oxford University Press, Inc.
13
Figure 6.32 Biasing the BJT amplifier at a point Q located on the active-mode segment of the VTC.
Microelectronic Circuits, Sixth Edition Sedra/Smith Copyright © 2010 by Oxford University Press, Inc.
14
Microelectronic Circuits, Sixth Edition
Sedra/Smith Copyright © 2010 by Oxford University Press, Inc.
15
Figure 6.34 Graphical construction for determining the VTC of the amplifier circuit of Fig. 6.33(a).
Microelectronic Circuits, Sixth Edition Sedra/Smith Copyright © 2010 by Oxford University Press, Inc.
16
Microelectronic Circuits, Sixth Edition
Sedra/Smith Copyright © 2010 by Oxford University Press, Inc.
17
Microelectronic Circuits, Sixth Edition
Sedra/Smith Copyright © 2010 by Oxford University Press, Inc.
18
Figure 6.38 Illustrating the definition of rπ and re.
Microelectronic Circuits, Sixth Edition Sedra/Smith Copyright © 2010 by Oxford University Press, Inc.
19
Figure 6. 39 The amplifier circuit of Fig. 6
Figure 6.39 The amplifier circuit of Fig. 6.36(a) with the dc sources (VBE and VCC) eliminated (short-circuited). Thus only the signal components are present. Note that this is a representation of the signal operation of the BJT and not an actual amplifier circuit. Microelectronic Circuits, Sixth Edition Sedra/Smith Copyright © 2010 by Oxford University Press, Inc.
20
Figure 6.40 Two slightly different versions of the hybrid-π model for the small-signal operation of the BJT. The equivalent circuit in (a) represents the BJT as a voltage-controlled current source (a transconductance amplifier), and that in (b) represents the BJT as a current-controlled current source (a current amplifier). Microelectronic Circuits, Sixth Edition Sedra/Smith Copyright © 2010 by Oxford University Press, Inc.
21
Microelectronic Circuits, Sixth Edition
Sedra/Smith Copyright © 2010 by Oxford University Press, Inc.
22
Figure 6.47 The hybrid- small-signal model, in its two versions, with the resistance ro included.
Microelectronic Circuits, Sixth Edition Sedra/Smith Copyright © 2010 by Oxford University Press, Inc.
23
Table 6.4 Small-Signal Models of the BJT
Microelectronic Circuits, Sixth Edition Sedra/Smith Copyright © 2010 by Oxford University Press, Inc.
24
Figure 6. 48 The three basic configurations of BJT amplifier
Figure 6.48 The three basic configurations of BJT amplifier. The biasing arrangements are not shown. Microelectronic Circuits, Sixth Edition Sedra/Smith Copyright © 2010 by Oxford University Press, Inc.
25
Microelectronic Circuits, Sixth Edition
Sedra/Smith Copyright © 2010 by Oxford University Press, Inc.
26
Microelectronic Circuits, Sixth Edition
Sedra/Smith Copyright © 2010 by Oxford University Press, Inc.
27
Figure 6.51 Performing the analysis directly on the circuit with the BJT model used implicitly.
Microelectronic Circuits, Sixth Edition Sedra/Smith Copyright © 2010 by Oxford University Press, Inc.
28
Figure 6.52 The CE amplifier with an emitter resistance Re; (a) Circuit without bias details; (b) Equivalent circuit with the BJT replaced with its T model. Microelectronic Circuits, Sixth Edition Sedra/Smith Copyright © 2010 by Oxford University Press, Inc.
29
Figure 6.59 Two obvious schemes for biasing the BJT: (a) by fixing VBE; (b) by fixing IB. Both result in wide variations in IC and hence in VCE and therefore are considered to be “bad.” Neither scheme is recommended. Microelectronic Circuits, Sixth Edition Sedra/Smith Copyright © 2010 by Oxford University Press, Inc.
30
Figure 6.60 Classical biasing for BJTs using a single power supply: (a) circuit; (b) circuit with the voltage divider supplying the base replaced with its Thévenin equivalent. Microelectronic Circuits, Sixth Edition Sedra/Smith Copyright © 2010 by Oxford University Press, Inc.
31
Microelectronic Circuits, Sixth Edition
Sedra/Smith Copyright © 2010 by Oxford University Press, Inc.
32
Figure 6.62 (a) A common-emitter transistor amplifier biased by a feedback resistor RB. (b) Analysis of the circuit in (a). Microelectronic Circuits, Sixth Edition Sedra/Smith Copyright © 2010 by Oxford University Press, Inc.
33
Figure 6.64 Basic structure of the circuit used to realize single-stage, discrete-circuit BJT amplifier configurations. Microelectronic Circuits, Sixth Edition Sedra/Smith Copyright © 2010 by Oxford University Press, Inc.
34
Microelectronic Circuits, Sixth Edition
Sedra/Smith Copyright © 2010 by Oxford University Press, Inc.
35
Figure 6.66 (a) A common-emitter amplifier with an emitter resistance Re. (b) Equivalent circuit obtained by replacing the transistor with its T model. Microelectronic Circuits, Sixth Edition Sedra/Smith Copyright © 2010 by Oxford University Press, Inc.
36
Figure 6.69 Sketch of the magnitude of the gain of a CE amplifier versus frequency. The graph delineates the three frequency bands relevant to frequency-response determination. Microelectronic Circuits, Sixth Edition Sedra/Smith Copyright © 2010 by Oxford University Press, Inc.
37
Figure P6.29(a) Microelectronic Circuits, Sixth Edition Sedra/Smith Copyright © 2010 by Oxford University Press, Inc.
38
Figure P6.30 Microelectronic Circuits, Sixth Edition Sedra/Smith Copyright © 2010 by Oxford University Press, Inc.
39
Figure P6.34 Microelectronic Circuits, Sixth Edition Sedra/Smith Copyright © 2010 by Oxford University Press, Inc.
40
Figure P6.52 Microelectronic Circuits, Sixth Edition Sedra/Smith Copyright © 2010 by Oxford University Press, Inc.
41
Figure P6.62 (c) Microelectronic Circuits, Sixth Edition Sedra/Smith Copyright © 2010 by Oxford University Press, Inc.
42
Figure P6.107 Microelectronic Circuits, Sixth Edition Sedra/Smith Copyright © 2010 by Oxford University Press, Inc.
Similar presentations
