1. Plan for the installation of the TAMU screen

2. Area of work within the dome 4 meter Blanco

3. Equipment and tools in use
Drills
Cables
Fiber Rope
Wood
Laser
clamp
Winches
Cherry picker, electric articulated arm

4. Installation of the main beam
This beam is located at the correct angle, using the clamp to hold it in the correct position.
This is a work in height 15 m, and used the "Cherry picker"
Beam clamp on three points

5. The beam is in the position shown in the figure but below the platform

6. Installation of the frame
You have to lift the frame with winches to connect with the main beam. The connection of the frame with the beam in its three points using the Cherry picker.
Frame
While the frame connected to the beam, is to locate the position of the three arms that adjust the angle of the frame,

7. The frame with the screen connection
The connection of the screen with the frame is on floor C, the crane is necessary to move the screen

8. Final connection and adjusting the screen
The screen together with the frame for this operation are needed steel cables and winches. connect the three points of the beam and three adjustable points, needed for this operation the "Cherry picker"

9. Light modules

10. Socket head cap screw 5/16-18 thd

12. Modules
North

13. Modules
West

14. Modules
south

15. Modules
East