1. BO-A210N User Manual 1. Registration methods 2. Delete methods
1. pin code Capacity : 6,000
[NOTE] 2. Default Master Pin Code:
3. Enter the menu : [*] 2580 [#] / End of menu : [*]
4. LED Infomation : (1) CLOSE : Door close (2) OPEN : Door open (3) MENU : Enter manu
(4) MODE : Manual Door Open Mode or Key Switch Mode (can't mode set overlap)
Input Power : DC12V or 24V
1. Registration methods
1-1. Registration of Pin code
(Consecutively)
[*] → Input Master Code 4 digit → [#] Enter the menu → [21] → [#] → Input User Pin code 4~8 digit (available consecutively register)
→ [#] → [*] (Exit)
※ enter User Pin Code → [#] ( Open the door )
1-2. Registration of Pin code
(Assign User ID)
[*] → Input Master Code 4 digit → [#] Enter the menu → [22] → [#] → Input 4 digit user ID( 0001~6000) → [#] →
Input User Pin code 4~8 digit → [#] → [*] (Exit)
If, Available User ID 1 beep and Unavailable User ID 2 beep
2. Delete methods
2-1. Delete all Pin code
[*] → Input Master Code 4 digit → [#] Enter the menu → [39] → [#] → [*] (Exit)
2-2. Delete Pin Code
(1) Delete use pin code
[*] → Input Master Code 4 digit → [#] Enter the menu → [33] → [#] → Input 4~8 digit (user Pin Code)
(2) Delete use user ID
[*] → Input Master Code 4 digit → [#] Enter the menu → [34] → [#] → Input 4 digit for (User ID)
3. Set-up the function methods
3-1. Change the Master Pin Code
[*] → Input Master Code 4 digit → [#] Enter the menu → [99] → [#] → Input 4 digit for change Master Pin Code → [#] → [*] (Exit)
※ Notice : Master Pin Code is for enter menu, please install after change the number.
If lost it ,can not enter menu.
3-2. Lock time set up (Default 3 sec)
[*] → Input Master Code 4 digit → [#] Enter the menu → [40] → [#] → Input the change the time (01~99 sec)
3-3. Manual Door Open Mode
( passively open the door, if release,
return normal mode)
(1) Manual Door Open ON ( MODE LED ON)
[*] → Input Master Code 4 digit → [#] Enter the menu → [51] → [#] → [*] (Exit)
(2) Manual Door Open OFF
[*] → Input Master Code 4 digit → [#] Enter the menu → [52] → [#] → [*] (Exit)
3-4. Key Switch Mode
( If contract registered card,
hold down open the door,
contract one more,
return normal mode )
(1) Key switch ON ( MODE LED ON )
[*] → Input Master Code 4 digit → [#] Enter the menu → [61] → [#] → [*] (Exit)
(2) Key switch OFF
[*] → Input Master Code 4 digit → [#] Enter the menu → [62] → [#] → [*] (Exit)
3-5. Keypad Light ON / OFF
( Default ON )
(1) LED ON
[*] → Input Master Code 4 digit → [#] Enter the menu → [42] → [#] → [*] (Exit)
(2) LED OFF
[*] → Input Master Code 4 digit → [#] Enter the menu → [43] → [#] → [*] (Exit)
3-6. Voice ON / OFF
(1) Voice ON
[*] → Input Master Code 4 digit → [#] Enter the menu → [44] → [#] → [*] (Exit)
(2) Voice OFF
[*] → Input Master Code 4 digit → [#] Enter the menu → [45] → [#] → [*] (Exit)
3-7. Voice volum Set
( Default Volum Mediem )
[*] → Input Master Code 4 digit → [#] Enter the menu → [46] → [#] → Choice (1)Large (2)Mediem (3) Small
3-8. Voice Set ( Korean or English )
( Defailt Korean )
(1) Voice Korean
[*] → Input Master Code 4 digit → [#] Enter the menu → [48] → [#] → [*] (Exit)
(2) Voice English
[*] → Input Master Code 4 digit → [#] Enter the menu → [49] → [#] → [*] (Exit)
3-9. Reset Fatory
( Delete All Data and Setting )
[*] → Input Master Code 4 digit → [#] Enter the menu → [88] → [#] → [*] (Exit)
22-12, Cheongdam-ro 39 beon-gil, Yangju-si, Gyeonggi-do, Korea
BUILDONE Co.,Ltd.

2. Wiring Diagram 1. Door Lock Installations (DEAD BOLT,EM LOCK,STRIKE)
Red
+12V
Black
GND
Green
OPEN
Yellow
Brown NO
Blue
COM
White NC
+12V
POWER
GND
EXIT
BUTTON
LOCK
LOCK +
LOCK - PC
Management
Program
Black
Orange
Gray
Usb Converter
2. Auto Door Diagram
Red
+12V
Black
GND
Green
OPEN
Yellow
Brown NO
Blue
COM
White NC
POWER
+12V
GND
Auto Sensor