1. How to access NVR via EZDDNS
This section only describes how to configure EZDDNS (private DDNS of Uniview) It is recommended if the device is connected to the Internet directly or in single-NAT networking. Step1: Ensure the IPC has been successfully accessed to public internet by router. Step2 :Go to the web page ( route:setup-network-DDNS ),enable DDNS,choose the EZDDNS

2. How to access NVR via DDNS
Step3: Type in a customized domain name in the blank. Then test the domain name to check if it’s occupied.

3. How to access NVR via DDNS
Step4: click save, the device status is online, the device address will be appear.

4. How to access NVR via DDNS
Step5: access NVR via EZDDNS

5. How to access NVR via DDNS
Note: If you want to use No-IP DNNS or DynDNS, please register a domain name first, Then you can set DDNS on NVR.

6. 封底