1. FLAME Science Team Meeting 2007
Fire Sciences Lab Presentation
February 22,

2. FSL Files on DRI FTP Site
AKDuff.xls - Collection date, geographical sample location, duff composition
Burn_experiments_final_drafts_ xls stack burn schedule
CarbonAnalysis.xls - Ash carbon analysis
CSUGCData06.xls - Canister gas analysis
DRI_CSU_canister_info.xls - Notes associated with canister
FuelMoistures.xls - Fuel moisture data
List of StackBurns_2006_V01.xls - Burn #, Fuel Composition, Dilution Ratio, Filter Start/Stop Time, Ignition Time, Flame Out Time, Can Start/Stop Time, Ignition Method, Fuel Weight, Ash Weight, Moisture Content, Comments
TSI and RR neph cal check.xls - Final TSI and RR neph cal check using SUVA
Real time data files for each 2006 burn

3. FSL Real Time Data Gathered During Fire
*Stack Flow Velocity
*Stack Flow Temperature
*Platform Temperature
Platform Atmospheric Pressure
*Fuel Weight
*Thermo Environmental O3
*Licor CO2
*Licor RH
Licor Dew Point
Licor Pressure
Licor Temperature
*TSI Neph Flow
*TSI Neph Total Scatter (Red, Green, Blue)
*TSI Neph Backscatter (Red, Green, Blue)
TSI Neph Sample Temperature
TSI Neph Pressure
TSI Neph RH
* Denotes data printed to spread sheet
*RR Neph Total Scatter
RR Temperature
RR Pressure
*RR RH
*Thermo Environmental CO (TECO)
TECO Pressure
TECO Temperature
*Thermo Environmental Total Hydrocarbon
Thermo Environmental NO
Thermo Environmental NO2
Can Code
*Can pressure
Can ON/OFF Time
Filter Code
*Filter Flow
Filter ON/OFF Time
*Date
*Data Start Time
*Sample Time Relative To Start Time

5. Canister Analysis Results
CO, CO2,
MCE (Combustion Efficiency)
CH4
C2 and C3 gases

6. 2006 Stack Burn Canister Data 5/26 - 5/30

7. CH4 (ppm)

8. Stack Burns
C2H4 vs. CO
C2H4 (ppm)

9. Stack Burns
C3H6 vs. CO
C3H6 (ppm)
CO (ppm)