1. Final Year Project (FYP) 2016-2017
School of Computer and Communication Engineering
Universiti Malaysia Perlis (UniMAP)
Research Methodology

2. Chapter 1 contents Introduction Procedure2
Procedure 3
Techniques for Simulations and Measurements 4
Summary

3. Server & Tools Business
6/4/2018
What is Research Methodology?
A way to systematically solve the research problem
Formulate various steps that are to be adopted by a researcher in studying his research problem along with the logic behind them.
Need to know which of these research methods/techniques, are relevant and which are not, and what would they MEAN and INDICATE and WHY??
-how research is done scientifically
-formulate steps that are to be adopted by research
-For example, an architect, who
designs a building, has to consciously evaluate the basis of his decisions, i.e., he has
to evaluate why
and on what basis he selects particular size, number and location of
doors, windows and ventilators, uses particular materials and not others and the
like.
© 2012 Microsoft Corporation. All rights reserved. Microsoft, Windows, and other product names are or may be registered trademarks and/or trademarks in the U.S. and/or other countries.
The information herein is for informational purposes only and represents the current view of Microsoft Corporation as of the date of this presentation. Because Microsoft must respond to changing market conditions, it should not be interpreted to be a commitment on the part of Microsoft, and Microsoft cannot guarantee the accuracy of any information provided after the date of this presentation. MICROSOFT MAKES NO WARRANTIES, EXPRESS, IMPLIED OR STATUTORY, AS TO THE INFORMATION IN THIS PRESENTATION.

4. Sections of Research Methodology
DESCRIPTION OF THE PROCEDURE EXECUTED IN THE PROJECT
Describe procedure involved in the project.
DESCRIPTION OF THE TECHNIQUES/METHODS EXPLICITLY
Describe the techniques/methods used in the project in an explicit way.
BRIEF DESCRIPTION ON SUMMARY
Recap the techniques or methods utilized in the project.

5. Example: Sections of Research Methodology
Textile Antenna
Effect of Metallic Objects
RF Exposure
Shielding Effectiveness
SAR Dosimetry
EEG Recording
Cognitive Performance
Physiological Parameters

6. Example: Sections in Methodology
Description for on this part should be relevant to your project, for example:
3.1 Introduction
3.3 Wearable Antennas for Body-Centric Wireless Communications
3.4 Measurement Setup for On-body Radio Propagation Channel
3.5 Shielding Effectiveness Measurement
*All of these keypoints can be transformed into Sections.

7. Example Part 1: Wearable Antennas
Textile Monopole (TM)
Material Properties
Top radiator and ground plane: Shieldit Super
t = mm
σ = x 105 Sm-1
Substrate: Felt
t = 1.7 mm
εr = 1.43
tanδ = (at 2.58
GHz)
Textile Patch (TP) 7

8. DESCRIPTION OF MEASUREMENT SETUP FOR SUBJECT-SPECIFIC EFFECT
A narrowband on-body measurement campaign was performed in an RF shielded room lined with microwave absorbing sheets in the Electromagnetic HyperSensitivity (EHS) Laboratory at Politeknik Syed Sirajuddin, Perlis, Malaysia. The dimensions of this RF-shielded room are 4 x 3 x 2.5 m3. The room was furnished with a wooden table, a flat touchscreen monitor, and an arm chair. Flat metallic sheets covering the walls protected the room from external EM interference. This measurement campaign was aimed at investigating the effect of metal on the radio propagation channel for on-body scenarios. A 2-port PNA (Agilent PNA E8362B) was used to determine the S21 of a link with transmitting (Tx)-receiving (Rx) antennas placed on the body, as shown in Figure 3.7 (a) and (b).
Example Part 2: Effects of Metallic Objects

9. DESCRIPTION OF MEASUREMENT SETUP FOR SUBJECT-SPECIFIC EFFECT
Server & Tools Business
6/4/2018
DESCRIPTION OF MEASUREMENT SETUP FOR SUBJECT-SPECIFIC EFFECT
The Tx (connected to port 1) was fixed at the right side of the upper arm (RUA), near the shoulder. The Tx placement was mounted on the RUA because this location was more realistic for the BCWC application; also, it did not limit regular movements of the user, and it was safer for the subjects. The Rx (connected to port 2) was mounted on eight different locations, i.e., right chest (RC), left chest (LC), right waist (RW), left waist (LW), right thigh (RT), left thigh (LT), right ankle (RA), and left ankle (LA), as illustrated in Figure 3.7 (b).
Example
© 2012 Microsoft Corporation. All rights reserved. Microsoft, Windows, and other product names are or may be registered trademarks and/or trademarks in the U.S. and/or other countries.
The information herein is for informational purposes only and represents the current view of Microsoft Corporation as of the date of this presentation. Because Microsoft must respond to changing market conditions, it should not be interpreted to be a commitment on the part of Microsoft, and Microsoft cannot guarantee the accuracy of any information provided after the date of this presentation. MICROSOFT MAKES NO WARRANTIES, EXPRESS, IMPLIED OR STATUTORY, AS TO THE INFORMATION IN THIS PRESENTATION.

10. Example Part 3: Shielding Effectiveness Measurement
In order to determine the effectiveness of the shielding in the shielded room, the free space measurement technique (based on Standard No. IEEE 299 (IEEE Standards, 1997)) using two horn antennas was applied. The instruments used in the shielding effectivess measurement were the Rohde & Schwarz Signal Generator (SG) model SMBV100A, the Rohde & Schwarz Handheld Spectrum Analyzer (SA) model FHS4, three horn antennas, two shielded coaxial cables, and connectors.
Describe technique that you use in your measurement.
List out the equipments used in your projects.
Your detailed methodological explanation will help you to describe your project design.

11. Example Part 3: Shielding Effectiveness Measurement
Free space
RF-shielded room
*Based on IEEE299 Standard 11

12. Summary
This chapter discusses the methodology of designing the planar textile monopole and patch antennas, and describes their important parameters. This chapter also presents the measurement setup to characterize the subject-specific on- body radio channel at 2.45 GHz considering the metallic accessories on the body.
Summarize all the techniques/methods you use in your project in final section.

13. Thank you