1. How to assemble LED bulb kit supplied by
Global Solar India
How to assemble LED bulb kit supplied by

2. This is the complete kit

3. Insert holder wire through bulb body
Insert holder wire through bulb body. Fix holder with bulb body by some adhesive.

4. Take out one LED module apart if 2-3 are joined in a strip
Take out one LED module apart if 2-3 are joined in a strip. Let us call LED face as top and other side as bottom.

5. Insert resistance and capacitor as shown from the bottom side
Insert resistance and capacitor as shown from the bottom side. Keep resistance little apart from surface as this will be hot while ON.

6. Take out holder wire from center and fix LED module in bulb body by pressing from all sides.

7. Now solder all the six points ( S1 to S6) after cutting extra leads of Capacitor and resistance.

8. After soldering check the bulb for functioning
After soldering check the bulb for functioning. If all LEDs are glowing, put the top lance simply pressing till it give clicked sound.

9. Now your LED bulb is ready. So simple…..?

10. For more details contact:
Sunil Kumar Singh
Global Solar India
SB-39, Avishkar Complex
Old Padra Road,
Vadodara (Gujarat)
Pin
Phone:
Website: