1. Worlding Leading Technology
E.MC N series Valve

2. Clean Air(to be filtered by 40μm filter element)
General Specification
Fluid
Clean Air(to be filtered by 40μm filter element)
Acting
Air Pilot
Port size
1/8",1/4",3/8",1/2"
Valve type
5 port 2 position
Operation pressure
Mpa (21-114psi)
Guarantee pressure
1.5Mpa (215psi)
Operation flow
L/min
Temperature
-5℃ to 60℃
Body material
Anodised aluminium
Available voltage
220VAC,110VAC,24VDC
Scope of voltage
AC:+/-15% DC:+/-10%
Power consumption
AC:0.7W DC:0.9W
Protection class
NEMA 4(IP65)

3. Product Feature
1. Low power consumption—0.9w, but absorbing ability equal to 5 w power coil;
2. Small temperature rising, stable temperature around 10 ℃
3. Contact protection function, guarantee the reliability of control circuit On/Off
4. Low drive current, short response time, prolong PLC’s life
5. Long lifetime：20mil cycle
6. High frequency, up to 8 hz.
7. Easy replacement, the same installation size with 4v series

4. Product Comparison Model AirTac 4V-210 E.MC N2M251-08 Photo
Power consumption 3w w
Lifetime
20,000,000 cycle
Max frequency
5 cycle/sec
8 cycle/sec
Special Function NO
PLC Contact Protection： Guarantee the reliability of control circuit On/Off function

5. High satisfaction from different customers-1
Mustard packaging machine
* The headache problem before: air cylinder work more and more slow after hours working.
* Reason analysis: air cylinder working in high fequency and caused solenoid valve very hot, so
the excitation time become longer.
* Solution: use E.MC N2M working in steady 10℃ even 24 hours.

6. High satisfaction from different customers-2
Wide-format inkjet printer:
*working condition-solenoid valve keep in circular telegram long time once the printer turn on
*Problem:solenoid coil up to 80℃ and burned very often.
*Solution: Change to use E.MC NM series low power valve totally solve the problem.

7. PLC Relay Solenoid valves High satisfaction from different customers-3
Normal control system including three parts: PLC+Relay+Valve
PLC
Relay
Solenoid valves

8. E.MC Low Power Valve Connect With PLC Directly
Advantage：
Without relay, cost down
2. One PLC can hold more E.MC low power valves. Using Less PLC.
One Control System Can Reduce 1 or 2 PLC，10 relays.
Saving cost 280—550USD
250—300usd/pcs
3—4USDusd/pcs