1. Multiple Regression – Part I tomescu.1@sociology.osu.edu
Advanced Statistical Methods: Continuous Variables
Multiple Regression – Part I

2. The Multiple Regression Model
Ŷ = a + b1X1 + b2X biXi
- this equation represents the best prediction of a DV from several continuous (or dummy) IVs; i.e. it minimizes the squared differences btw. Y and Ŷ  least square regression
Goal: arrive at a set of regression coefficients (bs) for the IVs that bring Ŷs as close as possible to Ys values
Regression coefficients:
minimize (the sum of squared) deviations between Ŷ and Y;
optimize the correlation btw. Ŷ and Y for the data set.

3. Interpretation of Regression Coefficients:
a = the estimated value of Y when all independent (exploratory) variables are zero (X1,…i = 0).
bi measures the partial effect of Xi on Y;
= effect of one-unit increase in Xi, holding all other independent variables constant.
The estimated parameters b1, b2, ..., bi are partial regression coefficients; they are different from regression coefficients for bi-variate relationships between Y and each exploratory variable.

4. Three criteria for a number of independent (exploratory) variables:
(1) Theory
(2) Parsimony
(3) Sample size

5. Common Research Questions
Is the multiple correlation between the DV and the IVs statistically significant?
If yes, which IVs in the equation are important, and which not?
Does adding a new IV to the equation improve the prediction of the DV?
Is prediction of a DV from one set of IVs better than prediction from another set of IVs?
Multivariate regression also allows for non-linear relationships, by redefining the IV(s): squaring, cubing, .. of the original IV

6. Assumptions Random sampling;
DV = continuous; IV(s) variables = continuous (can be treated as such), or dummies;
Linear relationship btw. the DV & the IVs variables (but we can model non-linear relations);
Normally distributed characteristics of Y in the population;
Normality, linearity, and homoskedasticity btw. predicted DV scores (Ŷs) and the errors of prediction (residuals)
Independence of errors;
No large outliers

7. Initial checks 1. Cases-to-IVs Ratio
Rule of thumb: N>= *m for testing the multiple correlation;
N>=104 + m for testing individual predictors,
where m = no. of IVs
Need higher case-to-IVs ratio when:
the DV is skewed (and we do not transform it);
a small effect size is anticipated;
substantial measurement error is to be expected
2. Screening for outliers among the DV and the IVs
3. Multicollinearity
- too highly correlated IVs are put in the same regression model

8. 4.a. Multivariate Normality
4. Assumptions of normality, linearity, and homoskedasticity btw. predicted DV scores (Ŷs) and the errors of prediction (residuals)
4.a. Multivariate Normality
each variable & all linear combinations of the variables are normally distributed;
if this assumption is met  residuals of analysis = normally distributed & independent
For grouped data: assumption pertains to the sampling distribution of means of variables;
 Central Limit Theory: with sufficiently large sample size, sampling distributions are normally distributed regardless of the distribution of the variables
What to look for (in ungrouped data):
is each variable normally distributed?
Shape of distribution: skewness & kurtosis. Frequency histograms; expected normal probability plots; detrend expected normal probability plots
are the realtionships btw. pairs of variables (a) linear, and (b) homoskedastic (i.e. the variance of one variable is the same at all values of other variables)?
4.a. This assumption applies differently to different multivariate statistics. For regression analysis (and other procedueres when subjects are not grouped, as they would be in ANOVA), the assumption applies to the distribution of the variables themselves; for grouped subjects (e.g. ANOVA), the assumption applies to the sampling distribution of means of variables (Central L TH: with sufficiently large sample size, sampling distribution are normally distributed regardless of the distribution of the variables)
In a normal distribution, the values of skweness and kurtosis should be close to zero. Kurtosis >0  too peaked distribution, with short, thick tails; kurtosis<0  too flat, and too many cases in the tails. Non-normal kurtosis produces an underestimate of the variance of a variable. BUT: best to look at visual appearanceof the distribution, especially with large N
The residuals (yhat – Y) are normally distributed about the predicted DV scores. The residual scatterplot should show a pile up of residuals in the center of the plot at each value of predicted score, and a normal distribution of residuals trailing off symmetrically from the center

9. Heteroskedasticity = caused by: non-normality of one of the variables;
Homoskedasticity
for ungrouped data: the variability in scores for one continuous variable is ~ the same at all values of another continuous variable
for grouped data: the variability in the DV is expected to be ~ the same at all levels of the grouping variable
Heteroskedasticity = caused by:
non-normality of one of the variables;
one variable is related to some transformation of the other;
greater error of measurement at some level of an IV

10. Residuals Scatter Plots to check if:
4.a. Errors of prediction are normally distributed around each & every Ŷ
4.b. Residuals have straight line relationship with Ŷs
- If genuine curvilinear relation btw. an IV and the DV, include a square of the IV in the model
4.c. The variance of the residuals about Ŷs is ~the same for all predicted scores (assumption of homoskedasticity)
- heteroskedasticity may occur when:
- some of the variables are skewed, and others are not;
 may consider transforming the variable(s)
- one IV interacts with another variable that is not part of the equation
5. Errors of prediction are independent of one another
Durbin-Watson statistic = measure of autocorrelation of errors over the sequence of cases; if significant it indicates non-independence of errors

11. Major Types of Multiple Regression
Standard multiple regression
Sequential (hierarchical) regression
Statistical (stepwise) regression
R² = a + b + c + d + e
R²= the squared multiple correlation; it is
the proportion of variation in the DV that is
predictable from the best linear combination of the IVs
(i.e. coefficient of determination).
R = correlation between the observed and predicted Y values (R = ryŶ ) a x2

12. Adjusted R2
Adjusted R2 = modification of R2 that adjusts for the number of terms in a model. R2 always increases when a new term is added to a model, but adjusted R2 increases only if the new term improves the model more than would be expected by chance.
[Standard Error of the Estimate is the Standard Deviation of the error term, and is the square root of the Mean Square Square Residual (or Error)]

13. Standard (Simultaneous) Multiple Regression
all IVs enter into the regression equation at once; each one is assessed as if it had entered the regression after all other IVs had entered.
each IV is assigned only the area of its unique contribution;
the overlapping areas
(b & d) contribute
to R² but are not assigned
to any of the individual IVs

14. Table 1: Regression of (DV) Assessment of Socialism in 2003 on (IVs) Social Status, controlling for Gender and Age
**p <0.001; *p < 0.05;
Interpretation of beta (standardized) coefficients: for a one standard deviation unit increase in X, we get a Beta standard deviation change in Y;
Since variables are transformed into z-scores (i.e. standradized), we can assess their relative impact on the DV (assuming they are uncorrelated with each other)
Independent variables
Linear regression
DV = scores from 1 to 5 B
(unstandardized coefficient)
Standard Error
BETA
(standardized coefficient)
Model I: Effect of Social Status without Controlling for Lagged Assessment of Socialism
Gender (Male=1)
-0.044
0.069
-0.023
Age
0.011**
0.003
0.135
Social Status
-0.207**
0.034
-0.217
Constant
2.504
0.131
N = 742;
Fit statistics
F= 15.5 (df=3) Adjusted R2=0.06 14

15. Sequential (hierarchical) Multiple Regression
- researcher specifies the order in which IVs are added to the equation;
each IV/IVs are assessed in terms of what they add to the equation at their own point of entry;
If X1 is entered 1st, then X2, then X3:
X1 gets credit for a and b;
X2 for c and d;
X3 for e.
IVs can be added one at a time, or in blocks a

16. Std. Error of the Estimate
Model Summary
Model R
R Square
Adjusted R Square
Std. Error of the Estimate
Change Statistics
R Square Change
F Change
df1
df2
Sig. F Change 1
,109a
,012
,011
,80166
9,128 2
1524
,000
,200b
,040
,037
,79101
,028
14,772 3
1521
a. Predictors: (Constant), age1998, gender 1998, female=0
b. Predictors: (Constant), age1998, gender 1998, female=0, tertiary 1998 = 1, else =0, emlement 1998 = 1, else =0
The Regression SUM of SQUARES, SS(regression) = SS(total) + SS(residual) SSregression = Sum (Ŷ – Ybar)² = portion of variation in Y explained by the use of the IVs as predictors; SStotal = Sum (Y - Ybar)² SSresidual = Sum (Y- Ŷ)² - the squared sum of errors in predictions R² = SSreg/SStotal

17. ANOVA
The Regression MEAN SQUARE : MSS(regression) = SS(regression) / df, df = k where k = no. of variables
The MEAN square residual (error): MSS(residual) = SS(residual) / df, df= n - (k + 1) where n = no. of cases and k= no. of variables.
Model
Sum of Squares df
Mean Square F
Sig. 1
Regression
11,732 2
5,866
9,128
,000a
Residual (error)
979,415
1524
,643
Total
991,147
1526
39,460 5
7,892
12,613
,000b
951,687
1521
,626
c. Dependent Variable: eval soc 1998 categories

18. Hypothesis Testing with (Multiple) Regression F – test
The null hypothesis for the regression model:
Ho: b1 = b2 = … = bk = 0
MSS(model)
F =
MSS(residual)
The sampling distribution of this statistic is the F-distribution

19. Unstandardized Coefficients Standardized Coefficients t Sig.
Coefficientsa
Model
Unstandardized Coefficients
Standardized Coefficients t
Sig. B
Std. Error
Beta 1
(Constant)
1,661
,095
17,510
,000
gender 1998, female=0
-,010
,041
-,006
-,242
,809
age1998
,008
,002
,109
4,270 2
1,762
,096
18,330
Gender (female=0)
-,007
-,004
-,171
,864
Age in 1998
,006
,090
3,330
,001
Elementar educ 1998 = 1, else =0
,070
,054
,036
1,282
,200
tertiary educ 1998 = 1, else =0
-,223
,052
-,115
-4,258
Estimated income for 1998 (in z-scores)
-,058
,020
-,077
-2,960
,003
a. Dependent Variable: eval soc 1998 categories

20. t – test for the effect of each independent variable
The Null Hypothesis for individual IVs
The test of H0: bi = 0 evaluates whether Y and X are statistically dependent, ignoring other variables.
We use the t statistic b
t =
σB where σB is a standard error of B
SS(residual)
σB =
n - 2

21. Assessing the importance of IVs
if IVs are uncorrelated w. each other: compare standardized coefficients (betas); higher absolute values of betas reflect greater impact;
if the IVs are correlated w. each other: compare total relation of the IV with the DV, and of IVs with each other using bivariate correlations; compare the unique contribution of an IV to predicting the DV = generally assessed through partial or semi-partial correlations
In partial correlation (pr), the contribution of the other IVs is taken out of both the IV and the DV;
In semi-partial correlation (sr), the contribution of the other IVs is taken out of only the IV  (squared) sr shows the unique contribution of the IV to the total variance of the DV

22. Assessing the importance of IVs – continued
In standard multiple regression, sr² = the unique contribution of the IV to R² in that set of IVs
(for an IV, sr² = the amount by which R² is reduced, if that IV is deleted from the equation)
If IVs are correlated: usually, sum of sri² < R²
the difference R² - sum of sri² for all IVs = shared variance (i.e. variance contributed to R² by 2/more variables)
Sequential regression: sri² = amount of variance added to R² by each IV at the point that it is added to the model
In SPSS output sri² is „R² Change” for each IV in „Model Summary” Table
sr² = squared semi-partial correlation; under exterme circumstances, it can be larger than R².
Sequential regression; the apparent importance of an IV is very likely to depend on it spoint of entry to the equation. In seq. Regression (and statistical), sri² sum up to R².