1. NL 100/230 AUTOMATED MACHINING CENTER FOR FLANGES NALITECK

2. NL 100/230 STAGES: 1st - Pre-nailing of the wooden boards;
2nd - Nailing;
3rd - Machining of the drag hole, washer hole and double hole;
4th - Machining of flange, chamfer and core tear.
5th - Bushing pressing;
6th - Machining of the diagonal hole;
7th - Stacking.

3. NL 100/230 Description of Operations in the Flange Internal Side
External Side
Diagonal hole
Core tear
Expanded bushing
Double hole
Drag hole
Washer hole
Flange
Chamfer

4. NL 100/230 1st Station: Nailing 2nd Stage: Nailing
1st Stage: Pre-nailing
P.S: Boards may be pre-drilled with any holes needed in the finished product such as the central or axial hole.

5. NL 100/230 2nd Station: Nailing 3rd Stage Washer hole Drag hole
Double hole

6. NL 100/230 3rd Station: Machining 4th Stage Machining of drag hole
Machining of flange and chamfer

7. NL 100/230
5th Stage: Bushing pressing
4th Station: Press Machine

8. NL 100/230 5th Station: Machining and Stacking
6th Stage: Machining of the diagonal hole
7th Stage: Stacking
5th Station: Machining and Stacking

9. NL 100/230 Technical Information: Flanges: from 100 cm to 230 cm;
Cycle Time (average): 1 flange per minute;
Linear Guide Systems;
Pneumatic system for flanges fixing;
Tools clamping system performed by clamps meeting ER standards;
Settings performed by HMI control system;
WEG motors;
Approximate dimensions: 20m (length) x 4m (width) x 2,5m (height).