Download presentation
Presentation is loading. Please wait.
Published byBruno Crawford Modified over 6 years ago
1
Automatic Dental Machining With the Witech MIC 5.
Machining Bench
2
WorkNC Dental Machining Bench on Witech MIC 5
MIC 5 Machining … WorkNC Dental Machining Bench on Witech MIC 5 Part : Bridge 3 Elements, Material : Cobalt Chrome, Machine : MIC 5 / 5 Axis machine, Template : Standard fine 4 Tools, Tools : D4, D3, D2, D1, Total Machining Time : 40 mn, Machining time by Elmt : 13 mn, Quality : Fine, Scan Setup : Unknown
3
Details of the machining Bench.
4
WorkNC Dental Project preparation
Project Creation in WorkNC Dental : 8 steps, less than 1mn30 second for preparing the project, Claculation Time : 4 mn 30 second Project creation Import of STL Part Automatic template selection Nesting Optimization Automatic margin line Fixture pin insertion Support pin cutting Calculation Launch
5
WorkNC Dental Project Template details
CoCr-Standard Fine : Cobalt Chrome template, 4 Tools used in the template, 10 Toolpaths for the complete part machining, Total Machining time 40 mn,
6
WorkNC Dental Project Template details
CoCr-Standard Fine : Roughing Toolpath : 10 mn , Machining Inside Outside.
7
WorkNC Dental Project Template details
CoCr-Standard Fine : Re-Roughing Toolpath : 12 mn , Machining Inside Outside.
8
WorkNC Dental Project Template details
CoCr-Standard Fine : Finishing Toolpath : 7 mn , Finishing Outside (Extrados).
9
WorkNC Dental Project Template details
CoCr-Standard Fine : Finishing Toolpath : 9mn, Finishing Inside (Intrados).
10
WorkNC Dental Project Template details
CoCr-Standard Fine : Support pin cutting : 2 mn,
11
WorkNC Dental Project Template details
CoCr-Standard Fine : Machining result :
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.