1. On the leading edge of new technology
WiseImage 6.0 for AutoCAD 2000/2000i/2002/2004 and AutoCAD LT 2000/2000i/2002/2004
On the leading edge of new technology

2. New Raster selection features
Working with raster objects has become much simpler
Now you can select Hybrid objects as AutoCAD vector objects (no command required)
New Raster selection
To enable raster selection work in Acad native style just switch on this mode.

3. New Raster selection features
Working with raster objects has become much simpler
One click on the raster object ….

4. New Raster selection features
Working with raster objects has become much simpler
You can select as many raster objects as you need
In this mode you can also select all AutoCAD entities

5. New Raster selection features
You can move raster objects as easily as vector objects (and group them as well )
You can use vector snap for raster objects
You can change the geometry of raster objects
You can change linetype of raster objects
You can change lineweight of raster objects
AutoCAD commands can be applied to raster objects
Array
Mirror, Copy
Scale, Rotate, Move

6. New appearance of calibration
On starting the Calibration command the dialog appears
New appearance of calibration

7. New appearance of calibration
Now we can view all properties of calibration points
and change them

8. New appearance of calibration
The creation of a new grid has become
more convenient
Preview will facilitate this work

9. New appearance of calibration
Manual changing of the grid point location

10. MultiPage features MultiPage features
Loading one page from the MultiPage Tif File
For example we have the multipage file
MultiPage features
1 page
2 page
3 page
4 page

11. Loading one page from the MultiPage Tif File
MultiPage features
Loading one page from the MultiPage Tif File
- Open the Image Insert dialog
- Type “mptif.tif>2” (second page from mptif.tif)
- Click Hide, Show preview
Press the Open button
mptif.tif>2

12. MultiPage features Save the image to the MultiPage Tif File
Change the raster data and run the rSaveAs command
- To add the last page - type mptif.tif>5
- Press the Save button
mptif.tif>5
rSaveAs

13. Now the MultiFile contains 5 pages
MultiPage features
Now the MultiFile contains 5 pages
1 page
2 page
3 page
4 page
5 page

14. Visualization of running command
When working with AutoCAD there is often a question what command is now started?
We can show you the solution to this problem using the example of selection

15. Visualization of running command
Run rSelect command using the button on the toolbar
As you can see those three buttons are pressed.
Thus WiseImage shows that the mode of single hybrid selection is on

16. Visualization of running command
The last mode of your selection will be remember after exit from command
Thus you visually can observe what commands are started.
It can be widespreaded to all commands of WiseImage and even AutoCAD.

17. New Type Rasterization of Vector Objects
Alternative rasterization engine

18. That’s all
for the time being…